Samsung Wireless Printer Setup Download

Setting up the Samsung wireless printer is the initial step to be carried out after it is purchased. The setup process usually includes unpacking the printer, setting the power connectivity, loading the correct papers, installing the ink or toner cartridges, downloading the driver, and establishing the wireless connection. The setup procedures must be done to access the entire features of the Samsung wireless printer. Make sure you perform the setup instructions correctly, else it can result in an issue with the Samsung wireless printer. The brief steps on Samsung wireless printer setup download is discussed on this web page.

Easy Steps On How To Set Up The Samsung Wireless Printer

Check if the seal is present on top of the printer box.

Take the Samsung printer out and position it on an even surface.

Discard all the tapes from the Samsung wireless printer.

Connect the electrical cord between the Samsung printer’s rear and the outlet.

Switch On the Samsung printer and load papers, and then insert the toner or ink cartridges.

Tap the Menu button on the printer’s front panel. Touch the Wireless option and press WPS Setting.

Choose PIN and an eight-digit password gets displayed on the control panel.

Enter the PIN on the PC that is linked to the network and install the driver to complete the setup.

Instructions For Setting Up The Samsung Wireless Printer

For Samsung wireless printer setup download, open the shipment box and take all the supplies out of it. Remove the Samsung printer from the packed box and place it on a leveled area. Ensure your printer has no damages on it. Connect the power cord at the rear of your Samsung printer.

Plug the cord’s other end to a working source. Locate the Power button on the Samsung printer and press it to switch On the device. Insert enough stack of unused papers into the main input tray. Install the original cartridges into the slots.

Windows:

Step 1: Download the Samsung Wireless Easy Setup app on your Personal Computer. Begin the installation by running the downloaded file. Select the Next button and wait for the installation to get completed.

Step 2: Tap the Finish option and then run the Samsung Easy Wireless Setup application. Choose Next and power On the Samsung wireless printer. Click the Next button and a Select the Wireless Setup Method dialog box appears on the computer. Touch the radio button that is present next to the Using a USB cable option.

Step 3: Click Next and select the name of your Service Set Identifier from the queue of networks that are available. Select Next and type the WEP or WPA key in the Network Password field. Wait for the connection process to end; this might take a few minutes.

Step 4: Click the Wireless button and hit Next, and then print a test page. Disconnect the USB cord from the Samsung printer and the computer to finish the connectivity.

Mac:

Step 1: Insert the USB cord to the USB port on the Samsung printer. Attach the USB cord’s other end to the Mac Personal Computer. Once the connection is complete, run the Wireless Setup app to open the wireless setup. The Main Installation dialog box will open that shows the Samsung Easy Wireless Setup page.

Step 2: Start the Samsung wireless printer setup download process by choosing the Next button. For the first time, tap the type of connection as Using a USB cable. Ensure that the Samsung printer is linked to the Mac system using the USB cable. Choose Next, and the Installation Wizard detects all the devices that are associated with the network.

Step 3: From the list of networks, choose your SSID name and then hit the Next button. Type the WEP, WPA, or WPA2 security code in the Network Password field on the Mac system and touch Next. Do not proceed until the Samsung printer gets connected to the network.

Step 4: Now tap Next and click Finish on the prompt window that appears on the screen. Check if the name of your Samsung printer displays in the System Preferences window to end the Samsung wireless printer setup download.