remove the printhead on a lexmark printer

How To Remove The Printhead On A Lexmark Printer

To remove the printhead from the Lexmark printer, all you need to do is just perform the guided instructions given below. Purchase a new printhead from an online retailer and replace it with the old one. If you get an error message for how to remove the printhead on a Lexmark printer, then your printer is having a problem with it. If the Printhead Error appears on the screen, the first step is to make sure that your firmware is up-to-date. Also, you can download and install it from the manufacturer’s site.

Quick Steps To Remove The Printhead In A Lexmark Printer

  1. Make sure that your Lexmark printer is ON. If not, then press the power button.
  2. Choose the Setup button on the printer’s Control panel.
  3. Select the Replace Printhead option followed by the Maintenance menu.
  4. Tap the Ink menu, select the More options, and then choose the Replace Printhead option, if your printer is built with a touchscreen.
  5. Take the printer cover off and check if the carrier shifts to the center.
  6. Gently press the tab and take out the latch.
  7. Pull the latch and take the printhead out carefully.
  8. Replace the old printhead of the Lexmark printer with a new one.
how to remove the printhead on a lexmark printer

Learn In Detail About How To Remove The Printhead In A Lexmark Printer

Step 1: If the Printhead error appears on the screen, try to clean it as per the instructions provided here. If the printhead is plugged with a dried up ink cartridge, then clean it. Press Menu –> Select.

Step 2: Again, tap the Menu option, until the Clean printhead option appears on the second line of the screen. The Short Clean option appears on the screen when you press the Select option. Press Select, once the short clean completes.

Step 3: If the error does not get cleared by doing so, then remove the printhead from your Lexmark printer and install a new one. For how to remove the printhead on a Lexmark printer, go with the instructions given here. First, switch the Lexmark printer ON.

Step 4: Once the printer gets powered on, press the Setup button on the printer’s Control panel. Now, select the Replace Printhead option followed by the Maintenance tag. For printers with a touchscreen panel, touch the Ink menu, select More options, and then click Replace Printhead.

Step 5: Now, take the printer cover off. Turn off the printer if the carrier does not move to the center automatically. To turn off the printer, follow the instructions given here.

Step 6: Take the power cord off the rear end of the Lexmark printer and remove it from the electrical outlet. Press the button and lift the latch. Pull it upward to remove the printhead.

Step 7: After removing the printhead, clean it as per the guided instructions to clear the issue. If the printhead issue does not get cleared after performing the clean operation, then replace it with the new one.

Step 8: Get a new printhead online or an offline store. Unbox the new printhead. Pull the carrier latch, and take the printhead out of the shipping container.

Step 9: Now, open the printer cover to install the Printhead. If there is no printhead in the printer, then the carrier moves to the printhead access area (middle). Tap the carrier latch and pull it up.

Step 10: Insert the new printhead into the carrier and close the latch. Press the top of the latch until it gets placed correctly. Close the printer cover. The process of how to remove the printhead on a Lexmark printer is now complete.

shares
hp printer technical support