Lexmark X5495 Error 1203

To fix the Lexmark x5495 error 1203, troubleshoot the communication error between the printer and the printhead. The error code 1203 indicates that there is a communication failure between one of the printhead. If cleaning the cartridge does not fix this issue, then replace it with a new one. If the problem occurs with the new printer, then contact the manufacturer to get technical Support. If a problem occurs with the printer, then follow the guided instructions given below.

Steps To Fix The Lexmark X5495 Printer Error Code 1203

Switch the Lexmark x5495 off and open the printer cover.

Take the ink cartridge out of the printer.

Place the ink cartridge on a flat table.

Gather a line-free cloth or cotton swabs and use hot water to clean the printhead.

Dip the cotton swabs in hot water or a mix of hot water and isopropyl alcohol.

Clean the printhead using the cotton swab that is dipped in hot water.

Redo the above action until there is no ink in the cotton swab.

Allow the ink cartridge to dry and replace it. Now, try a test print.

Learn In Detail About How To Fix The Lexmark X5495 Printer Error 1203

Step 1: To troubleshoot a communication Error between the Cartridge and the Printer, and go with the instructions given here. Initially, switch off the printer and take all the power supply cable out from the back of the printer. Wait for 30 seconds.

Step 2: Now, reinsert the power cable into the printer and power it on. If the error does not occur on the printer, then try a test print. If the Lexmark x5495 error 1203 message appears on the printer’s control panel, then power off the printer, remove the top cover of it and both cartridges from the printer.

Step 3: Now, switch off the printer and remove the power supply cord from it. Wait for 30 seconds and then reboot the printer. If the error 1203 occurs on the printer’s operator panel, then there is an issue with the printer hardware. To resolve the printer hardware issue, contact the manufacturer.

Step 4: If the error is resolved, then power off the printer and unplug the power supply cord from it. Now, open the printer cover and insert the ink cartridges into it. Place the black cartridge in the left of the carrier and color at the right.

Step 5: After placing the ink cartridges, close the top cover of the printer. Now switch the printer on and check its control panel for any messages that are displayed. If the Lexmark x5495 error 1203 message appears on the screen, then clean the cartridge contacts.

Step 6: To clean the cartridge contacts, go with the instructions given here. Switch on the printer and raise the scanner lid. Wait for the cartridge carrier to move to the end of the printer. Remove the cartridge carrier. Place the cartridge on a table.

Step 7: Get a clean lint-free cloth to wipe the cartridge. Dip the lint-free cloth in hot water and wipe the cartridge. Repeat the same process to clean the gold-colored contacts. Wipe the cartridge in one direction. After cleaning the cartridge, allow it dry, and then reinsert it into the printer.

Step 8: Switch on the printer and check the printer’s operator panel for any error message. If the error message occurs, then check if the cartridge is defective or not. To check the cartridge, follow the procedure given.

Step 9: Power off the printer, open the top cover and remove one cartridge from it. Close the cartridge access door and the top cover of the printer. Switch on the printer; if the error message still appears on the screen, then this cartridge is defective.

Step 10: To replace the defective cartridge, get a new one from the manufacturer’s site or an online retailer. Place the new cartridge in the printer and check if the error returns. If the error does not appear, then the issue is resolved. Try a test print. If the Lexmark x5495 error 1203 continues, then the issue is with the printer hardware. Contact the manufacturer to get technical solution to clear this issue.