lexmark x4650 ink cartridge error

Lexmark X4650 Ink Cartridge Error

The Lexmark x4650 ink cartridge error occurs if there is a printhead malfunction. The cartridge is placed inside the printer with the help of a printhead. The ink cartridge error in Lexmark x4650 may occur due to a low ink level. If the ink cartridge is low or empty, replace it with a new one or refill the cartridge. Most printhead issues can be resolved easily. The Lexmark printer is prone to occasional problems. These problems include empty paper trays, low toner, and print cartridge errors. Go with the instructions given below to resolve the Lexmark x4650 ink cartridge issues.

Steps To Resolve The Lexmark X4650 Cartridge Error Issue

  1. Take out the empty or low ink cartridge from the Lexmark printer.
  2. Close the cartridge carrier lid and the scanner unit.
  3. Dislink the power cord from the electrical outlet and wait for a few seconds.
  4. Relink the power cord to the electrical outlet after waiting for a while.
  5. Press the power button to activate the Lexmark printer.
  6. Reinsert the ink cartridge into the printer.
  7. Close the carriage door after reinserting the ink cartridge.
  8. Check if the error persists. If the error does not reoccur, then the problematic cartridge has been recovered. The only solution is to replace the cartridge with a new one.
lexmark x4650 ink cartridge error

How To Resolve The Lexmark X4650 Cartridge Error Issues

Step 1: The Lexmark printer is one of the best peripheral devices. It is known for its reliability. This lets you print properly.

Step 2: Generally, Lexmark x4650 ink cartridge error are related to the printhead of the printer. To resolve this issue manually, follow the instructions given here. Open your Lexmark printer and wait until the carriage slides over.

Step 3: Take the ink cartridge from your Lexmark printer. From the printhead, remove the ink cartridge and clean the printhead as well as the ink cartridge using a wet cotton swabs.

Step 4: Dip the cotton swab in hot water to clean the printhead and each ink cartridge. Redo this until there is no ink residue from the ink cartridge on the cotton swab.

Step 5: After cleaning the cartridge and the printhead, allow them to dry and then replace it. If the problem is with the ink cartridges, then replace them with a new one. Finally, perform a test print to check whether the ink cartridge error has resolved.

Step 6: If the above instructions does not clear the Lexmark x4650 ink cartridge error, there are two reasons.

Step 7: If the ink cartridge is defective or ok, then you need to replace the printhead. To replace the ink cartridge with a new one, go with the description given here. First, purchase a new ink cartridge from an online retailer.

Step 8: After getting a new ink cartridge, the next step is to take out the empty or low cartridge form the printer and replace it with a new one. To do this, open the printer. You will find the instructions on how to install the ink cartridge.

Step 9: The first step is to press the cartridge release tab to take it from the printer. Place the new ink cartridge and press the front of it until it fits correctly. To install a black cartridge, you will need to insert it at an angle, use both your index fingers and press the top of the cartridge until it fits into place.

Step 10: Try a test print to check whether the Lexmark x4650 ink cartridge error is resolved. You can also remove the current cartridge and shake it gently to distribute the ink evenly.

shares
hp printer technical support