lexmark x4270 error code 1203

Lexmark X4270 Error Code 1203

To resolve the error code1203 on the Lexmark x4270 printer, you can clean the copper contacts, shut down the printer for one minute, and restart it. The Lexmark x4270 error code 1203 indicates the ink cartridges problem. This error comes under hardware failure. Replace the problematic cartridges with a new genuine Lexmark cartridge. If the cartridge missing message appears on display, then there is a problem with one of the cartridges. Follow the guided instructions given below to resolve the Lexmark x4270 error 1203.

Simple Steps To Resolve The Lexmark X4270 Printer Error Code 1203

  1. Make sure that the printer is turned on. Open the access door and take out the black and color ink cartridges from the printer.
  2. Close the cartridge access door with the cartridges out of the printer.
  3. Switch off the printer for a while and then turn it back on.
  4. Check the printer’s control panel whether the same error occurs on the screen.
  5. Reinstall the ink cartridges, if the Cartridge Missing message appears on the screen.
  6. Place the color cartridge in the left and the black in the right side of the carrier.
  7. Close the cartridge door with one cartridge in the carrier if the 1203 message appears on the printer’s control panel again.
  8. Replace the defective cartridge with a new one.
lexmark x4270 error code 1203

Learn In Detail About How To Fix The Error 1203

Step 1: If a Lexmark x4270 error code 1203 message appears on the control panel of the Lexmark x4270 printer, it indicates a problem with one of the ink cartridges. Refer to the instructions given here to make sure that it is a cartridge problem rather than a hardware issue.

Step 2: First, ensure that your Lexmark x4270 printer is turned on. Pull the control panel forward and open the cartridge access door. The printer cartridge carrier moves and stops at the loading position. Now, take the old cartridge out of the carrier.

Step 3: Place the cartridges after rebooting the printer. Now, close the ink cartridge access door. Switch off the printer and then turn it back ON. Check the printer’s control panel for any message that is displayed.

Step 4: If the control panel displays the same Lexmark x4270 error code 1203 after rebooting the printer, then the problem is with the printer hardware. If the control panel displays the Cartridge Missing message on the screen, then go with the instructions given below to fix it.

Step 5: Initially, reinstall the ink cartridges back into the printer. Insert the black cartridge in the left side of the carrier and the color in the right side of the carrier. Now, press the top of the cartridges slowly until they click into place.

Step 6: Don’t give extra pressure on the cartridge while inserting them in the carrier. By doing this, the cartridges could get damaged. After inserting the ink cartridges in the respective place, close the cartridge access door and control panel.

Step 7: Now, power on the printer. If the error message 1203 appears on the control panel, then try to identify which cartridge has failed. To find it, insert the one cartridge in the carrier at a time. Insert the single cartridge in the carrier and close the access door and control panel.

Step 8: Now, check the operator panel. If the error message displays on the screen, then this cartridge is causing the failure. If the Cartridge Missing message appears, then the second cartridge has failed. Replace the faulty cartridge with a new one.

Step 9: To replace the faulty cartridge, purchase a new cartridge online. You can also get a new cartridge from the manufacturer’s site. Sign to the manufacturer’s website, enter your printer model and click Submit.

Step 10: Purchase a new cartridge that suits your printer. If the cartridge does not gets placed correctly, then remove and reinstall it to resolve the problem of Lexmark x4270 error code 1203.

shares
hp printer technical support