Lexmark Printer Fuser Error
The Lexmark printer Fuser error indicates that the peripheral has detected some problems with the fuser unit installed. The printer displays this error as 920.xx Service Fuser error, where x denotes any number. This error also occurs if the printer did not reach its optimum operating temperature. The fuser unit is the part of the printer that heats up to fuse the toner cartridge onto the page. Go through the description given below to know more about the Lexmark fuser error.
Quick Steps To Resolve The Lexmark Printer Fuser Error Issues
- Switch the printer off and wait for a minute.
- Power the Lexmark printer back on and see if the fuser error returns.
- Continue printing once the fuser error has resolved.
- Reinstall the fuser unit if the fuser error is displayed on the Lexmark printer.
- Ensure that there is nothing stuck inside the fuser unit of the printer.
- Unlock the fold-down door and look inside for any jammed items.
- Service the printer, if power cycling the printer does not clear this issue.
- Go with the instructions given by experts.
Learn More About How To Resolve The Lexmark Printer Fuser Error Issues
Step 1: Lexmark printers are known for their reliability feature. It can print a large set of documents and photos files quickly and efficiently. But like every other printer, the Lexmark printer also causes some issues. If any issue occurs in the Lexmark printer, users get to know the issue through error codes.
Step 2: If you have little knowledge about what these error codes stand for, then you can handle these issues and save the repair charges. The Lexmark fuser error is one of the most common errors that occur on the Lexmark printer. It occurs when the Lexmark printer fails to maintain the required temperature.
Step 3: A fuser is a consumable part of the Lexmark printer that heats up to fuse the toner onto the page. The meaning of fuser error depends on the error code displayed on it. Check the list of fuser error codes described beside.
Step 4: The fuser error code 921 & 922 indicates that the fuser unit is not at the optimum Temperature, 923 shows that it is over the given temperature. These error issues can be resolved easily. Over the life of the Lexmark printer, you can find an expert to change the fuser several times.
Step 5: The fuser is sold as a preventative maintenance tool kit. You can fix this issue temporarily by switching the printer off and turning it back on; this allows the fuser unit to reset.
Step 6: If the error occurs again, it is better to restore the fuser unit completely. The first step to resolve any fuser error is to switch off the printer and dislink all the cables from it. Hold on for a minute or more, and this helps the printer to reset. Power the Lexmark printer back on.
Step 7: Check if the Lexmark printer fuser error reoccurs. If the error is not found, then continue printing as performed before. It may have been an isolated incident. If the error returns, then reinstall the fuser unit of the Lexmark printer. Most fuser units in the Lexmark printer can be installed by the customer.
Step 8: To do this, unlock the left access opening of the Lexmark printer and make sure there is nothing stuck inside the fuser unit. This unit comes with a fold-down door flap open it and look inside for any jammed paper.
Step 9: If switching the printer off and back on does not resolve this issue, then better service the Lexmark printer. In these cases, the fuser unit will need to be replaced. The 920, 921, or 922 fuser error indicates the fuser unit is not up to the heating temperature.
Step 10: This issue occurs due to a bad fuser lamp or when not the proper power supply is given to the fuser unit.
Step 11: 923 error code shows that the fuser unit is overheating or heating up too fast. Before contacting the technician, you can try resetting the printer. Switch the printer off, see if anything stuck in the fuser unit, and turn it back on. Similarly, the 924 error code indicates the wrong fuser unit installation in the Lexmark printer. To clear this Lexmark printer fuser error, replace it with the correct fuser unit.