lexmark p6350 error 1102

Lexmark P6350 Error 1102

Error 1102 is very common with the Lexmark p6350. The main reason for this error is due to a failure in the communication between the printhead and computer or laptop. Some reasons behind this are the cartridge position is wron, no proper power supply to your system or printer, incorrect printhead position, or the power cord not working. To resolve the Lexmark p6350 error 1102, go with the instructions given below.

Quick Steps To Resolve The Lexmark P6350 Printer Error 1102

  1. Switch the computer or laptop off and detach the power cord from the rear end of the printer.
  2. Wait for 60 seconds, insert the power cord back, and then power on the computer.
  3. Check whether the error 1102 message recurs. If so, power off the printer.
  4. Take the power cord from the rear end of the printer.
  5. Open the cover on top of the printer and gently move the cartridges carrier to the center.
  6. Unlink both the ink cartridges from the printer and replace the power cord.
  7. Switch the Lexmark printer on.
  8. Try a test print if the error has resolved.
lexmark p6350 error 1102

Detailed Instructions To Resolve Lexmark E460DN Printer Firmware Error Issue

Step 1: To resolve this issue manually, follow the instructions given below. First, try to reinsert the printer cartridges. Initially, remove the print cartridges from the printer. Unlink the printer’s power cord from the electrical supply and then reconnect it back.

Step 2: After completing the above steps, the issue should have resolved. If the Lexmark p6350 error 1102 reoccurs, then try to replace your black cartridge with a new one. Take the black print cartridge out of the Lexmark printer and replace it with a new one.

Step 3: If the error 1102 does not re-appear, then try to reinsert the color print cartridges. If this error reoccurs, then replace the color cartridges with the new one. Check the printhead and the ink cartridges of the printer if the error persists.

Step 4: Check if the printhead is in good condition. Verify if the print cartridges are working properly. Now, switch the Lexmark printer off and also remove the power cord from the back of it.

Step 5: Remove the cover on top of the printer and move the cartridge carrier to the center. Gently insert the color ink cartridges, shut the cover, and switch on the printer. If the Lexmark p6350 error 1102 seems to persist, go to the next step.

Step 6: Clean the printer cartridges. Remove the cartridges form the Lexmark printer and clean it with a clean cloth. Dip the clean cloth in water and gently wipe the cartridge nozzle.

Step 7: After doing this, wipe the cartridges with another dry cloth. Let the nozzle dry before reinserting the cartridges. Wipe the printhead contacts with a cotton swab. Do this until there is no dirt on the cotton swabs.

Step 8: Now, go to the Defective Cartridge Test. Try to print a test page. If the printer prints the test page successfully, then the error has cleared. You can also resolve the 1102 error by following the procedure given below.

Step 9: You need to power off the printer before you proceed. First, switch off the printer. Take the power cord at the back side of the Lexmark printer. Leave it for 30 to 40 seconds.

Step 10: Now, reinsert the power cord back to the printer and switch the printer on. Restart your printer and computer and print a test page to verify whether the Lexmark p6350 error 1102 has resolved.

hp printer technical support