Lexmark E460DN Firmware Error
Test the Printer hardware to check if there is an error with the Lexmark e460dn. If the error is not with the hardware, then test the software that is installed. The Lexmark e460dn firmware error occurs when you print with the Lexmark driver installed using Point, and print using the Microsoft server Print Server with Windows 7 or Vista. The 900 firmware error also appears if there is a bad connection set up with an Internet Network Adapter or Network Card. Go with the instructions given below to clear this issue.
Steps To Resolve The Lexmark E460DN Printer Firmware Error
- Switch the Lexmark printer off and leave it for 30 seconds or more to clear its memory.
- Clear all the pending jobs from the computer or the network queue when the printer is turned off.
- Switch on the printer. If the error does not occur, then continue printing.
- Turn off the Lexmark printer again if the error recurs.
- Disconnect all the communication cables from the printer, except the power cord.
- Connect the printer’s power cord to the wall outlet and avoid connecting it via a surge protector.
- Power on the printer. If the error occurs, contact our experts for additional assistance.
- Try a test print if the error has cleared.
Complete Solution For Resolving The Lexmark E460DN Firmware Error
Step 1: The Lexmark e460dn firmware error occurs only when the printer is receiving information from a network or computer. This shows that there is a communication issue with your printer and network. If the error occurs when the peripheral is idle or not connected to the network, it is related to the printer’s hardware or router connection.
Step 2: Testing the Printer Hardware and Software can resolve this issue. If the error occurs due to a bad connection with an Internet Network Adapter or Network Card, test the Printer hardware. Such issues occur with the printer hardware.
Step 3: To test the Printer hardware of your Lexmark e460dn, go with the instructions given below. The first step is to switch off the Lexmark printer and wait for 30 seconds or more to clear its memory. Avoid power cycling the printer.
Step 4: Try to cancel all the on-going print jobs from the computer or network adapter. Doing this prevents any failed print jobs from being re-sent to the printer when it is switched on again. Switch on the Lexmark printer.
Step 5: If the error reoccurs, power the printer off, unlink all the communication cables from it except the power cord and leave it for a while.
Step 6: Power the printer ON. If the error reoccurs, then there might be a problem with the printer, the communication cable, or the print job itself. Follow the instructions to check the possible causes given below.
Step 7: Connect the printer’s power cord to the wall outlet directly, instead of using the surge protector for connection. If the Lexmark e460dn firmware error appears every time you switch on the printer, then the likely source of this problem is because of the printer.
Step 8: Switch off the printer and uninstall any installed options from it. These options include a paper tray, an extra memory, and any network cards. Switch the Lexmark printer on. If the error reoccurs, then contact the experts to get this problem resolved. If the error does not appear on the printer, then use the printer’s operator panel to print the Menu page.
Step 9: If the problem occurs due to software failure, then test and resolve it. First, try to send a different print job to the printer. The firmware error appears only when you send a particular file or print job. This indicates a problem with the software settings.
Step 10: This Lexmark e460dn firmware error occurs from only one specific computer or network adapter. If so, check the Driver setting on that particular computer.