lexmark e260 troubleshooting

Lexmark E260 Troubleshooting

The Lexmark e260 printer is a Monochrome laser printer. The most common issue faced by the Lexmark printer is that it doesn’t print properly. Check the print settings, verify whether the ink cartridges are installed. Ensure that the input tray of the Lexmark printer is loaded with enough plain paper. Also, check if the cables are connected to the printer and the power outlet. Try updating the printer’s software. Given below is the detailed procedure to fix the Lexmark e260 troubleshooting issue.

Quick Steps To Fix The Lexmark E260 Printer

  1. Check whether the connecting cord of the printer and the network is inserted correctly.
  2. Remove the defective cartridges from the Lexmark printer.
  3. Check whether too many Flash options are installed.
  4. Verify that there is no paper jam in the Lexmark e260 printer.
  5. Load the input tray of your Lexmark printer with sufficient and appropriate papers.
  6. Set the paper type settings on the printer’s control panel.
  7. Remove the additional trays attached to the printer.
  8. Reset the Lexmark e260 printer.
lexmark e260 troubleshooting

Elaborate Steps To Fix The Lexmark E260 Printer

For Lexmark e260 troubleshooting, first, ensure that your Lexmark e260 printer is connected to the electrical outlet and the printer is linked to the wireless network. Make sure your Lexmark e260 printer is connected to your wireless network. Confirm that the connecting cables are inserted correctly.

To replace the defective ink cartridges of the Lexmark printer, follow the succeeding steps. Open the front cover of the Lexmarke260 printer. Pull the multi-purpose feeder door. Pull the cartridge latch, to take it out of the printer. Take the new ink cartridge from the package, remove the packing materials around it. Shake it well before placing it into the position. Close the multipurpose feeder and the front door. While replacing the defective cartridges, replace the ink toner of the cartridges too. Remove the ink toners which are not aligned properly and then re-install it to their positions. Remove the defective toner cartridges, and replace it with a new one.

After setting the toners and the cartridges, check for the flash options installed in the printer. To remove multiple flash cards on the Lexmark e260 printer, follow the Lexmark e260 troubleshooting procedures. Turn off the Lexmark e260 printer. Remove the power cord from the printer and the power outlet. Remove the flash memory card from the rear of the Lexmark e260 printer.

Connect the detached power cord to the electrical outlet and power on the Lexmark e260 printer. On the input and the output tray of the Lexmark printer, check if there is any paper jam. Clear the jammed paper from those trays. There are some instances where you can find minute substances or particles in those areas. Remove the substances from these areas. Once you are done with clearing the paper jam, load the input tray with appropriate paper. Also, load enough paper in the input tray.

Check the paper job setting on the printer’s control panel. Change the paper type setting to the paper you have loaded in the input tray. Set the darkness, brightness and contrast settings on the printer’s control panel. For removing the multiple trays attached to the Lexmark printer, follow the proceeding steps.

Power off the Lexmark e260 printer. Remove the power cord from the printer and the power outlet. Take out the additional trays attached to the Lexmark e260 printer. The additional tray can be in the input and the output tray as well. Connect the detached power cord back to the printer and the power outlet. Power on the printer now.

If you have any issue with the printer after following the preceding Lexmark e260 troubleshooting steps, the best way to fix the issue is to reset the printer. Resetting the printer fixes half of the issues with the printer.

shares
HP Printer Guidelines