HP Smart Tank 7301 Setup

HP Smart Tank 7301 Setup – Simple Guidelines

HP Smart Tank 7301 Setup

It’s always a good notion to confirm that your printer is set up the right way. When you are certain that your printer is installed and configured correctly, you can ensure it functions at its peak. Now, this web page will take you through the process of setting up your HP Smart Tank 7301 printer. Implement the procedure as instructed and complete the HP smart tank 7301 setup like an expert.

Unpack Your Printer And Discard All Packing Materials

  • Open your printer package and take out each item you have received.
  • The package contains the HP Smart Tank 7301 printer, ink bottles, power cord, and a quick setup guide.
  • Remove all of the packing materials from the HP Smart Tank 7301 printer and its accessories.

Connect The Power Cord

  • Plug the power cord you received into the printer’s power port. Plug the opposite end of this cord into a power outlet.
  • Press the Power button in order to turn on your HP printer.
  • The Power LED should now light up.

Fill The Ink Tanks – HP Smart Tank 7301

  • Unpack one of the included ink bottles and remove the cap.
  • Open the ink access door and then open the tank cover.
  • Open the ink tank cap and align the ink bottle with the ink inlet.
  • Once the ink tank is full, you can remove the bottle from the filling port.
  • Repeat this process for all the ink tanks.
  • Finally, close the ink tank caps, tank covers, and ink access door.
  • You can just store the leftover ink in a cool, dry place.
  • When the ink tanks are full, the printer control panel will prompt you to install the printheads.
  • The oncoming section will guide you through the procedure for installing the printheads in detail.

Install The Printheads

  • Raise your printer’s ink cartridge access door and wait until the carriage comes to the center and stops moving.
  • Hit the blue button to open the printhead cover.
  • Take the included printhead and carefully remove the orange protector, cap, and protective tape.
  • Insert the printheads into the respective holders and wait until they click into place.
  • Finally, close the printhead cover and ink access door.

Load Your Paper And Complete The Alignment Process

  • Extend the paper tray and move the guides to the extreme corners.
  • Take a stack of paper and place it print side down in the paper tray.
  • Align the guides with the paper and reinsert the paper tray into the printer.
  • After loading the paper, the printer prints a printhead alignment page.
  • Take it out and place it print side down on the scanner glass.
  • The printer will now start scanning the alignment page.

Connect Your HP Printer And Computer

  • A compatible software is required to connect the printer and computer. You can download it from the HP website.
  • From your browser, visit the official HP website.
  • Enter your printer model – HP Smart Tank 7301 and download the software compatible with your Operating System.
  • Locate the downloaded driver file and run the same.
  • Proceed with the instructions on your screen and complete the installation.
  • Henceforth, you can use this software to access your printer.

We hope you have enjoyed learning how to set up the versatile HP Smart Tank 7301 printer. If you’d like to ask us any queries, please don’t hesitate to reach us. You can also get in touch with our technical experts to assist you in real-time to complete your HP Smart Tank 7301 setup. Just use the Call button we have provided to contact our experts.

hp printer technical support