HP Laserjet enterprise p3015dn printer duplex printing
The Laserjet Enterprise P3015DN printer supports the duplex printing feature. It contains two types of tray- photo tray and main tray. You can use the Automatic or Manual feed option to print. Save the paper cost and time while using the HP Laserjet enterprise p3015dn printer duplex printing feature.
Quick Steps for duplex printing from HP Laserjet Enterprise P3015DN
- Load enough papers into the input tray.
- Adjust the paper width guides for a secure alignment.
- Choose the document or photo that you intend to print.
- Enable the Duplex Printing feature under the Printing Shortcuts tab.
- Change the Paper tray option under the Services tab.
- Click Print to start the printing process.
- Take the printed sheet out of the output tray.
Elaborate Steps for duplex printing from HP Laserjet Enterprise P3015DN
Press the respective Power buttons to turn on the printer and the system. Insert plain papers with the print side facing downwards into the input tray to perform HP Laserjet enterprise p3015dn printer duplex printing.
Open an application to view the document. Click the File menu on the top menu bar. Click the Print option in the drop-down menu. View the Layout menu on the Print Dialog screen.
Choose either the Long-Edge binding or Short Edge binding option from the Two-sided tab. Click the Print option to begin the printing process.
If you select the option to Print on Both sides manually, load enough paper into the input tray. If you are loading special paper, follow the methods given below.
If you are using the Tray 1, insert the letterhead paper facing upwards with the top edge moving inwards into the printer.
If you are using any other tray, insert the letterhead facing downwards with the top edge facing the printer.
Select the File menu on the top of the menu bar. Choose the Print option. Click Manually Print on 2nd side under the Finishing menu.
Select Print. Proceed with the instructions mentioned on the computer screen to complete the process. Take the plain sheets of paper out of Tray 1.
Press the respective control panel option to proceed if required. If you are unable to print on both sides , proceed with the solutions given below.
Check if the paper is compatible with the Duplex Printing feature. Configure the printer driver to activate the duplex printing feature.
If the HP Laserjet enterprise p3015dn printer duplex printing feature is turned off, use the down arrow to highlight and press OK. Choose the Duplex option to turn it on. Do the changes to the print settings when it is inactive. Resolve the issue with the help of the solutions mentioned below.