HP Envy 6075 Wireless Setup

HP Envy 6075 Wireless Printer Setup

The HP Envy 6075 printer can be connected to a wireless network in three different ways. They are WPS, Using the HP Smart app and Wi-Fi Direct .All three methods mentioned above are easy to perform. Before you begin the HP Envy 6075 wireless setup, prepare your printer for it.

How To Setup Hp Envy 6075 wireless printer

Preparing printer for the wireless setup

  1. First, make sure that you have a computer or mobile that is compatible with the wireless network and Check if your internet is active.
  2. Make sure that your computer or mobile phone, printer, and wireless router are turned ON.
  1. Check whether your HP Envy printer is placed within the range of the wireless router.
  2. Make sure that you have completed your printer’s initial setup.

Now, let see the HP Envy 6075 wireless setup in detail.

Method 1:Wireless Printer setup using WPS button

Before you begin, check if your wireless router has the WPS button.

  1. Power on your HP printer.
  2. Now, locate the Wireless and Power buttons on your printer and press them at the same time for 3 seconds.
  3. After pressing the buttons for 3 seconds, release them, and hold down the WPS button on your router for to seconds or until the WPS connection is initiated on your router, release the button.
  4. Once the HP printer is connected to the wireless network, the Wi-Fi light will turn solid.
  5. On your computer, begin the software installation to complete the setup process completed.
wireless printer Setup Hp using wps
Using the HP Smart app

Method 2: Using the HP Smart app

On your Android, iOS, Windows 10, or macOS device, install the HP Smart app and perform the wireless setup. In the below section, the Android phone is taken as an example.

  1. Enable the Bluetooth feature on your Android phone.
  2. Install the HP Smart app on your Android phone from either HP Store or the Google Play Store.
  3. Now, initiate the Wi-Fi connectivity on your printer by holding down the Wireless button for 
  4. Wait for the wireless light to turn purple.
  5. Launch the HP Smart app. Tap the Plus sign followed by the Add Printer. Choose the HP Envy 6075 printer from the list.
  6. Perform the on-screen instructions to complete the wireless setup.

Method 3: HP Envy 6075 wireless printer setup with Wi-Fi Direct

If you don’t have a wireless router, but wish to use your printer within a local wireless network, then you can prefer this method. 

  1. Enable the Wi-Fi Direct feature on your printer first.
  2. To do so, hold down the Information, Cancel, and Resume buttonson the printer’s control panel for a few seconds.
  3. Once the Wi-Fi Direct is enabled on your computer, go to the Wi-Fi Settings 
  4. Look for the following printer name: HP= Setup<93_Envy 6000 series and select it.
  5. Perform the on-screen instructions to complete the wireless setup.
HP Envy 6075 wireless setup with Wi-Fi Direct


If you need any assistance on HP printers, feel free to contact our technical support team.

shares
hp printer technical support