how to setup lexmark wireless printer

How To Setup Lexmark Wireless Printer

Depending on the printer model, the appearance and the process of how to setup Lexmark wireless printer may vary. Remove all the packing material. Shake the toner cartridge and imaging unit. Do not touch or expose them to light for more than 10 minutes. Modify the guides to match the size of the paper that you are loading. View the Power button on the Lexmark printer and switch it on. Now, set the preferences and install the cartridges. Install the printer software and keep papers in the tray.

Short Steps For Setting Up The Lexmark Wireless Printer

  1. Take all the tape and packaging material from the box.
  2. Connect the power cord to the printer.
  3. View the Power button on the printer and press it.
  4. Set the preferences like the country, region, language, etc.
  5. Place papers in the tray according to its position.
  6. Adjust the guides such that the size of the paper matches with the papers that we place.
  7. Install the ink or toner cartridges by fixing it properly into the correct slots.
  8. Install the printer software and the printer will start its functions like printing, scanning, and copying successfully with no problems.
how to setup lexmark wireless printer

Brief Steps To Set Up The Lexmark Wireless Printer

Step 1: For how to setup Lexmark wireless printer, first remove the Lexmark printer from the box. Take the tape and packaging materials from the carton.

Step 2: Remove the tape from the scanner lid by raising the scanner lid and close it after removal. Grasp the handles on either side of the printer gently and raise the cartridge door until it holds in place.

Step 3: Now, remove the tape and packaging materials from inside the printer. Open the paper tray and pull it to extend it and remove the tape.

Step 4: Now, connect the power cord to the rear of the Lexmark printer and switch it on. Set the preferences by choosing the arrows button to choose the language, place, and choose OK.

Step 5: Place papers in the input tray by opening the door and extend the tray. Gently pull out the extender and lift the paper catch. Slide the paper guides to the outer position.

Step 6: Place a stack of plain, white paper in the tray and push the stack in the tray until it stops. Slide the paper guides until they rest at the paper edges. Push the paper tray forward so that it holds in place.

Step 7: Now, install the cartridges by holding the handles on either side of the cartridge access door and raise it until it fixes in place.

Step 8: Take the ink cartridge out of the package and be careful while handling it. Take the plastic tape from the cartridge. Lift the lid on the cartridge slot.

Step 9: Hold the cartridge by the sides with the nozzles to the printer and tap the cartridge forward until it holds in place.

Step 10: Now, close the lid on the cartridge slot and close the ink cartridge door to finish the process of how to setup Lexmark wireless printer.

shares