how to setup canon printer

How to setup canon printer

Printer setup of the Canon printer begins by printing unboxing the printer from the package and ends with the driver installation. Make sure that you follow the below-mentioned steps carefully to complete the setup with How to setup canon printer guide.

How to setup canon wireless printer

  1. Take the printer from its box and place the printer on a flat surface.
  2. Remove the protective tapes from the printer.
  3. Ensure that you remove the protective film on the printer.
  4. Take the power cable of the printer and insert it into the printer.
  5. Connect the alternate end of the wire to the electrical wall outlet.
  6. Take a stack of paper.
  7. Load the paper into the printer and align it.
  8. Install the ink cartridges into the printer.
how to setup canon printer

Elaborate steps on How to set up the Canon printer?

Take the new Canon printer out of the box and place it over a flat surface by following How to setup canon printer guide. Also, ensure that the place is nearby the wall outlet so that the cable doesn’t need to be extended.

Remove the tapes from the printer. Check the internal parts of the printer and also check for the protective paper on the scanner bed of the printer. If you find a protective film on the printer’s control panel, remove it. If the printer is used along with the protective film, it may cause issues to the touch control panel on a long run.

Take the power cable of the printer and take it out of its package. Insert one end of the power cable of the printer to the printer’s end and the other end to the electrical wall outlet. It is important that you should connect the power cable of the printer directly to the wall outlet and not to any other power sources like UPS or surge protector.

Turn on the printer by pressing the power button on the printer’s control panel and ensure you complete the initial setup by following the prompts on the screen like date, time and region.

Load a stack of paper and pull the input tray from the printer. Make sure that you align the paper using the width guides. If you do not align it, it results in paper jam error.

Take the new printer cartridge out of the packet and install it into the Epson printer. Open the access door of the printer and install the new cartridge. Make sure that the cartridges are snapped perfectly into the place.

After completing all basic setup using How to setup canon printer guide, the suitable printer driver which suits your printer model should be downloaded and installed. You can also use the CD which is given along with a printer to install the printer driver, you can follow the on-screen prompts which are displayed on the printer to complete the driver installation. Test the setup by printing a test document from the computer.

hp printer technical support