How to Setup HP Envy 5055 Printer

How to Setup HP Envy 5055 Printer?

How to Setup HP Envy 5055 Printer

This page shows you how to set up the HP Envy 5055 printer for the first time.

Setting up the printer is pretty easy. However, the setup process varies based on the printer model or series you’re using. The easy-to-do instructions given on this page will teach you how to set up the HP Envy 5055 printer, from unboxing to software installation.

The entire How to Setup HP Envy 5055 Printer process includes two simple steps.

  • Hardware setup
  • Installing the printer on a device

Completing The Hardware HP Envy 5055 Setup

Initially, we can complete the hardware setup, such as unpacking the printer, configuring the initial settings, installing the ink cartridges, loading paper, and aligning the ink cartridges on your printer.

  • Remove the printer from the packing bag and Styrofoam pieces and place it on a neat surface.
  • Unpack your printer completely by removing all the packing tapes, cardboard pieces, and foam liner from it.
  • Now, connect your unpacked printer directly to an electrical outlet and turn it on.
  • Once your printer becomes silent, configure the initial settings as per your preferences.
  • After doing that, open the ink cartridge access door of your printer.
  • Remove the cartridges from the package.
  • Ensure that the carriage is silent.
  • Now, open the ink cartridge’s slot lids.
  • Remove the orange protective tapes from the cartridges and install them into their slots.
  • Install the black cartridge on the right-hand side of the slot.
  • Close the lids and the ink cartridge access door of your printer.
  • Now, open the input tray on your printer.
  • Get the paper type that is suitable for your printing and load it with its print-side facing down into the tray.
  • Adjust the guides properly. Ensure that the paper is not overloaded in the tray.
  • Close the input tray and open the output tray & its extender.
  • Now, the alignment process will be initiated, and the printer will start printing the alignment page.
  • Place the alignment page on your printer’s scanner glass.
  • Tap the Scan button on your printer’s Scan the Alignment Page screen.
  • Now, the printer will start scanning the placed alignment page.
  • Once the printer scans the alignment page successfully, the Alignment Successful screen will open. Tap OK on it.

Installing The HP Envy5055 Printer On A Device

You can set up your HP Envy 5055 printer on your smartphone or the computer as per your needs.

For Smartphone

Connect your HP printer and the smartphone to the same network. After doing that, follow the instructions below.

  • Enable the Bluetooth feature on your smartphone.
  • Install and open the HP Smart app on your smartphone.
  • Set up your printer on your iOS or Android phone by following the prompts displayed on the screen.

HP Smart App

  • Use the HP Smart app if you want to set up your HP Envy 5055 printer through the wireless network on the Windows or Mac computer or smartphone.
  • This app helps you set up the printer that is in the Wi-Fi Setup mode or connected to the same network as your computer or smartphone.

For Computer

  • Use the HP Smart app or the HP Easy Start software to set up the HP Envy 5055 printer on your computer.

Contact us if you need to know more about setting up the HP Envy 5055 printer.

hp printer technical support