- Fix My Printer >>
- Setup HP 2652 On New Wi-fi Network
How To Setup HP 2652 On New Wi-fi Network?
Follow the steps and 2 simple methods given on this page to know how to setup HP 2652 on new Wi-Fi network.
Ensure the following before proceeding to the setup steps.
- Turn on your HP printer and make sure to connect both your printer and computer to the same Wi-Fi network.
- Ensure to place the printer near the router in order to reduce any interference.
- Now, if you had connected your printer to another Wi-Fi network earlier, restore the printer’s wireless settings to factory defaults.
- Press the Wireless button and the Cancel (X) button together on the printer and hold them for three seconds. This will reset your printer’s network settings.
- Now, proceed to set up your HP 2652 printer on a new Wi-Fi network.
- Steps to connect the printer to the Wi-Fi network using WPS

Simple Methods To Setup HP 2652 On New Wi-fi Network
Method 1: Using Push Button Configuration (PBC) Method
- Press the Wireless button on the HP 2652 printer and hold it for three to four seconds.
- The wireless light on the printer starts blinking when the WPS mode gets turned ON.
- Press the WPS button on the router and wait for the printer to connect automatically.
- If the printer connects successfully, the blue wireless light stops blinking and remains stable.
Method 2: Using PIN method
- Press the Wireless button and the Information button together to print the network configuration page. Now locate the WPS PIN on the printed page.
- Keep the Wireless button pressed on the HP printer for three to four seconds.
- On your computer, open the router’s configuration page and enter the WPS PIN.
- The printer takes two to three minutes to connect to the network.
- If the printer connects successfully, the blue wireless light stops blinking and remains stable.
Steps To Connect HP 2652 Printer To New Wi-fi Network Using HP Software
- If you have already installed the printer software on your computer, follow these steps.
- Open the printer software and click on the Tools tab.
- Select Device Setup & Software and click on the Connect a new device option.
- Select Wireless and follow the on-screen instructions to complete the wireless setup for your HP 2652 printer.
- If you have not installed the printer software, download it from the official HP site and begin the installation.
- Make sure to choose the Wireless option as the connection type to set up the HP 2652 printer on a new Wi-Fi network.
You can contact our technical team for further queries on how to setup HP 2652 on New Wi-fi Network.
Related Articles:123.hp.com/setup