How to set up Brother printer
Brother printers can be set up on wired or wireless connection depending on the connectivity capability of the printer. The printer setup involves performing the basic hardware setup and installing the printer driver on the computer to which the printer is to be connected, that comes on How to set up brother printer.
Quick guide for setting up Brother printer
- Take the printer out from the packaging box and place it on a flat surface. Remove all the packaging material from the printer.
- Open the front cover of the printer. Unwrap the drum cartridge and toner cartridge assembly.
- Insert the assembly into the printer.
- Close the printer’s front cover.
- Load a stack of plain paper into the input tray.
- Connect the printer to an electrical wall outlet, and turn the printer on.
- Install the printer driver according to your computer’s operating system.
- Connect the printer to a computer.
Descriptive instructions for setting up Brother printer
Once the printer is delivered to you, check if all the printer accessories are present in the package box. Take the printer out from the box and place it preferably on a flat surface. Set aside all the accessories and know on how to set up brother printer.
Remove all the packaging material from the printer. Open the front cover and clear any safety material inside the printer. Draw the paper input tray out and take it out from the printer. Remove any tapes or other packing material from it.
Unpack the drum unit and toner cartridge assembly. Peel off any sealing tapes on it. Shake assembly several times from side to side so that the toner gets evenly distributed inside it. Insert the assembly into the printer. Push the front cover into the printer again.
Draw the paper input tray out and remove it from the printer. Slide the paper width guides to fit the size of the paper that you are going to load while pressing the release lever of the green paper-guide. Make sure that the guides are seated firmly.
Fan the paper stack to make sure there are no curls or wrinkles, and then insert the stack into the paper tray. Make sure the stack is flat and below the maximum paper mark. Re-insert the paper tray firmly into the printer.
Connect the AC power cord supplied along with the printer into an AC outlet and power on the printer. Unfold the support flap on the printer and wait for the printer to finish warming up. The Ready LED should be lit.
Press the Go button the control panel. The printer will print a test page. The next step is installing the printer driver on your computer. Turn the printer off and do not connect it to the computer unless prompted by the installer.
Power up your computer and insert the setup disc into your computer. If you are a Windows user, Select the printer’s model and language when the opening screen automatically pops up. Click the Install Printer Driver and then select the ‘USB cable users’ option. Agree to the license agreement and click Next. Switch on the printer and then click Finish. Once the installation process is over, click Finish. Now you are completes the process on How to set up brother printer