how to reset lexmark e120

How To Reset Lexmark E120

To reset the Lexmark e120 printer, all you need is to gently press and hold the Cancel button for 30 seconds. The Lexmark e120 printer reset helps to resolve most of the printer issues. You can reset the printer if the Lexmark e120 printer displays an error lightindication. Resetting the printer is an easy and simple method to solve most of the printer issues. If you can not find the printer issue resolved even after resetting it, then better contact the manufactur to get better advice for how to reset Lexmark e120 printer. Go through the instructions given below to reset your Lexmark e120 printer.

Quick Steps To Reset The Lexmark E120 Printer

  1. Turn off the printer.
  2. Now detach the cord from the wall outlet.
  3. Gently press and hold the Cancel or Stop button for 30-60 seconds.
  4. Wait for a few minutes once you turn off the printer.
  5. Connect the power cords to the printer, then the peripheral.
  6. Check if the printer is working. If the reset is correct, then the printer works properly without any defect.
  7. Reset the factory setting to defaults. This helps to restore most of the settings to their factory values.
  8. Ensure that the connection between the printer and the system is made correctly.
  9. Proceed with the on-screen instructions if you face any resetting issues.
how to reset lexmark e120

Learn More About How To Reset The Lexmark E120 Printer

Step 1: Reading about how to reset Lexmark e120 printer helps to resolve printer related issues. Restoring factory setting to default is a simple and easy method to perform. The factory reset will return most of the settings to their factory values.

Step 2: However, the display language and settings in the Network and USB menus are not returned to factory defaults. Go through the instructions given here to restore the printer to factory defaults. Shut down the printer. Make sure no power supply is given it.

Step 3: Now, gently press and hold the Cancel or Stop button for more than three seconds. Before you begin to reset the factory setting to default by knowing how to reset Lexmark e120 printer, and ensure that the computer or network has stopped sending information to the printer.

Step 4: After turning the printer off for a few seconds, press the printer’s Power button to wake it up. Check the printer problem issue is resolved. You can also reset Drum unit of your Lexmark e120 printer. With the printer lid open, hold the drum unit, and toner unit in place.Also select the Cancel button. Hold the Cancel button until the light begins to cycle, and release it.

Step 5: Close the front door of the Lexmark e120 printer. Now the warning clears, and the counter resets to zero. After you reboot the drum printer press the CONTINUE or the right arrow to resume printing, to reset the Photoconductor in your Lexmark e120, go through the description given here.

Step 6: This method will reset the photoconductor to zero, and allow you to keep using your imaging unit for a long time, after the replacing it a message appears on the screen. The photoconductor reset will not solve any quality issues related to printing; it will simply allow you to keep printing beyond the printing time set on the unit, so move onto next step of how to reset Lexmark e120 printer.

Step 7: To reset the photoconductor of your Lexmark e120 printer, go through the method listed here. With the printer switched on, open the front door of it. Now, gently press and hold the Cancel button until all the lights start to cycle.

Step 8: Once all the lights start to cycle, close the front panel of the printer. Press the Continue button to resume the printing operation. If this method fails to clear the Replace Photoconductor message on the first attempt, power off the printer, and then repeat this method until the problem gets resolved.

Step 9: Use the configuration utility to reset the IP address of your Lexmark e120 printer. It will disable the DHCP function to prevent the printer from attempting to obtain the IP address other than the one you specify. On your Lexmark e120 printer’s control panel, push the Continue button.

Step 10: Now the printer prints a configuration sheet that displays the current IP address of your peripheral. Click the Start menu, type cmd in the search box at the bottom of the list, and press Enter in your keyword to display the Command Prompt. Go to the manufacturer’s site to get more information about IP address resetting and how to reset Lexmark e120 printer perfectly.

shares