How to Replace Drum on Brother Printer
In the Brother printer, the drum unit is the replaceable part that needs to be replaced but not often like a toner cartridge. Without a chip, the drum unit has no way to associate itself with the Brother printer. So the Replace Drum message appears on your printer assuming that you have not installed the drum unit and you might have to know how to replace drum on brother printer.
Replacing Drum on Brother Printer
- Locate the Power button on the printer and press it.
- Open the scanner cover.
- Open the top cover until the pull arm on the left side of the printer gets locked.
- Remove the drum unit including toner cartridge assembly.
- Pull the lock lever and take the toner cartridge out of the drum unit.
- Unpack the new drum unit and fix the toner cartridge strongly into the new drum unit until it locks into place.
- Place the drum unit including toner cartridge assembly back into the printer and close the top cover.
- Close the scanner cover by pulling the pull arm on the left side of the printer.
Related Articles For “Brother Printer”
Replacement of Drum in Brother Printer
Ensure that the printer is switched ON. Tap the Cover Release button and then open the front cover. Leave the printer plugged ON for about 10 minutes to cool down. Take out the old drum unit and the toner cartridge assembly with how to replace drum on brother printer guide.
You can place the drum unit and toner cartridge assembly on a piece of paper if you have accidentally spilled the toner. Some internal parts of the printer may be extremely hot due to the usage of the printer which helps you on replace drum on brother printer.
So wait for the Brother printer to cool down before you touch the internal parts of it. Hold the green lock lever on the left and remove the toner cartridge out of the drum unit. Unpack the new drum unit and discard the old drum unit.
Reinstall the toner cartridge into the new drum unit until it firmly locks into place. If you have placed the cartridge in a correct position, the lock lever on the drum will lift automatically and instantly to replace drum on brother printer.
Then, reinstall the new drum unit and toner cartridge assembly back into the printer. Close the front cover.
When you replace the old drum unit with a new one, you need to reset the drum counter by pressing the Reset button when the front cover is kept open.
Tap the Up arrow key to confirm that you are installing a new drum unit. Close the front cover when the LCD shows Accepted. Else, press Menu, and tap the Up or Down arrow key to select Machine Information to replace drum on brother printer.
Choose OK and press the Up or Down arrow key to choose Reset Drum. Tap OK for at least 3 seconds. Choose the Up arrow key to reset the drum unit counter and finally press Stop or Exit and complete the process on how to replace drum on brother printer.