How To Repair Lexmark Printer
Sometimes the errors like printhead problem, cartridge error, fuser error, memory error, paper jam issue, etc. in the Lexmark printer occurs. To resolve the problem of how to repair Lexmark printer, try cleaning the cartridge and resetting the printer.
8 Steps For Repairing Lexmark Printer
- Power off the Lexmark printer by pressing the Power button.
- Lift the printer lid\cover or scanner unit till the scanner support stands firmly.
- Look the Power button on the printer and switch it on.
- Make sure that the cartridge carrier moves and stops at the loading position.
- Replace the cartridge with a new cartridge.
- Lower the scanner unit of the printer till it closes completely.
- Clean the cartridge and fix it firmly in its position.
- Print an auto-alignment page. The Lexmark printer should print well with no issues.
Related Articles For “Lexmark Troubleshooting”
Detailed Steps For How To Repair Lexmark Printer
Step 1: The memory error indicates that the memory in slot is incompatible or defective. Now, switch off the printer and disconnect the power cord. Wait for atleast 30 seconds and plug the printer’s power cord directly into a grounded wall outlet.
Step 2: View the Power button on the printer and switch it on. If the error remains, switch off the printer, disconnect the power cord and remove the system board cover by removing the four screws that hold the board in place.
Step 3: Take the memory card located in the memory expansion slot. Now, lift the latches. Reconnect the power cord and then power the Lexmark printer back on without the memory card installed.
Step 4: If the error clears, probably the memory card is defective and needs to be replaced. Tap the Power button to switch off the printer. Lift the printer cover. Look for the Power button on the printer and turn it on. Now the ink cartridge carrier moves and stops at the loading position.
Step 5: Take the color ink cartridge. Lower the Lexmark printer till it is fully closed. Now, if the error message displays again, replace the black cartridge with a new one. If you receive the error message while both black and color cartridges are installed, replace both of them and move to the next step of how to repair Lexmark printer.
Step 6: Try cleaning and aligning the cartridges by switching off the printer. Open the printer and take out the cartridges. Clean them using a dust-free cloth and place them back again in the holder. Turn on the printer again and print an auto-alignment page by choosing Select.
Step 7: Sometimes, the errors like Printhead Problem, Unsupported Printhead, etc. may occur, which indicates a problem with the printhead. So navigate to the Replace Printhead in the menu on the printer.
Step 8: For touch-screen capable models, press Ink Level icons and touch More Options. Scroll down to select Replace Printhead. For other cases, touch the Wrench button. Now, scroll down to Maintenance Menu, choose OK and select Replace Printhead. Select OK again to confirm.
Step 9: Open the printer and then lift the latch. Lift the printhead out of the Lexmark printer carrier. Now, clean the contacts on the printhead carrier. This is the frame within the Lexmark printer from which you removed the printhead.
Step 10: Wipe the printhead contacts using a clean, lint-free cloth. Reinsert the printhead and close the latch till it firmly holds into place. Now, lower the latch and close the cover. You can also try updating the firmware for resolving the printer problem of how to repair Lexmark printer.