how to remove the cartridge from the lexmark printer

How To Remove The Cartridge From The Lexmark Printer

For how to remove the cartridge from the Lexmark printer, all you need to do is to follow the guided instructions given below. If you see the low ink indicator or your ink cartridge is more than six months old, then it is the right time to purchase a new cartridge. You may also separate the current toner cartridge and lightly shake it several times. Repeat this several times and see the result. If the print remains blurred after you have performed the given steps, then you have to replace the toner cartridge. Removing the cartridge is sometimes messy and challenging.

Easy Steps To Remove The Cartridge From The Lexmark Printer

  1. Gently press the button on the left side of the printer to free and lower the front opening.
  2. Push down the Release button on the base of the photoconductor system.
  3. Take the new toner cartridge out of the package.
  4. Now, lightly shake the toner cartridge to supply the toner evenly.
  5. Install the new toner cartridge that you purchased from the store or genuine online retailer.
  6. Align the white rollers on the toner cylinder with the white arrow to insert the new cartridge.
  7. Close the front opening after placing the toner.
  8. Take a test print to check the cartridge working condition.
how to remove the cartridge from the lexmark printer

Read More About How To Remove The Cartridge From Lexmark Printer

Step 1: If the printer ink level is low or the toner gets expired, then there is a chance of the printer to misbehave. Try to get the experts’ advise to resolve these issues. Experts generally suggest removing the cartridge from the printer by following the procedure of how to remove the cartridge from the Lexmark printer.

Step 2: Place the printer on the table. Now, press the button on the left side of the printer to free and lower the front opening of it.

Step 3: Gently press the release button on the base of the photoconductor unit of the printer. Hold the handle of the toner cartridge. Pull out to separate the toner cartridge from the printer. The photoconductor unit will remain unchanged in the printer.

Step 4: Now take the new toner cartridge from the package. Use the packing material from the new toner cartridge to ship the old toner back to the manufacturer for recycling.

Step 5: Take the new toner cartridge in your hand and lightly shake it in all directions to distribute the toner evenly. Do this two times then insert the new toner into the printer. Clean the toner with a lint-free cloth and follow the next step for how to remove the cartridge from the Lexmark printer.

Step 6: Open the lower front panel of the printer. Place the white rollers on the toner cartridge with the white arrows on the tracks of the photoconductor unit. Gently push the toner cartridge in as far as it can go inside the printer.

Step 7: Once the cartridge gets placed correctly, close the front opening of the printer. If the printer does not recognize your new cartridge, leave it in place then unplug the peripheral for ten minutes.

Step 8: After waiting for ten minutes, hold down the control switch for 30 seconds and then plug the printer back in. This method will refresh the printer memory allowing it to resync with the new cartridges.

Step 9: Now close the printer front opening. Do not perform any function on the printer to cause interruption. The toner cartridge will be replaced successfully.

Step 10: Send a print job to the printer to confirm that the new toner cartridge is working correctly. If not try again and follow the above mentioned procedure of how to remove the cartridge from the Lexmark printer.

shares
HP Printer Guidelines