How To Refill Lexmark 44XL Ink Cartridge
For how to refill Lexmark 44xl ink cartridge, clear the label from the upper side of the ink cartridge carefully. Beneath it is the filter opening in which you can fill the ink. Fill the required ink and insert the needle to the rear filler opening. Tilt the cartridge slightly and fill in the respective amount of ink carefully.
Quick Guide For Refilling Lexmark 44XL Ink Cartridge
- Take off the cartridge’s top label.
- Place the paper towel on the flat surface for any spills.
- Fill the syringe with ink depending upon the cartridge capacity.
- Make sure that the ink is filled with 25 ml of ink for the black cartridge and 15 ml of ink for color cartridges.
- Inject the ink into the hole to start filling the ink.
- Decide which hole needs to be filled with the respective ink in case of color cartridges.
- Handle it carefully in order to avoid any spills.
- Place the cartridge again in the printer.
Related Articles For “Lexmark Cartridges”
Detailed Explanation To Refill Lexmark 44XL Ink Cartridge
Step 1: Before starting the process of how to refill Lexmark 44xl ink cartridge, keep the cartridge on a paper towel. Remove the cartridge’s top label. Fill the syringe with a sufficient amount of ink, i.e., 25 ml of ink for black cartridges and 15 ml of ink for color cartridges.
Step 2: The amount of ink depends upon the cartridge capacity. If you refill the single-colored cartridge, inject the ink slowly in one of the holes underneath the label you removed.
Step 3: You can inject in any hole because they all are filled in the same sponge. After refilling the ink, you can leave the top label off as its absence doesn’t affect the printing quality.
Step 4: If the printer uses a tri-color cartridge, you need to decide which hole leads to which tank, i.e., cyan, magenta, or yellow.
Step 5: Usually, the top label on the cartridge tells which hole leads to which color compartment.
Step 6: If you are not sure, use a long needle or toothpick and insert in each hole before you working the process of how to refill Lexmark 44xl ink cartridge. When you take out the needle, it will be colored, so that you will be able to determine which ink to fill in the hole. Now, place the ink cartridge back in the printer.
Step 7: You should reset the printer by turning off the printer. Hold down the Ready and Return keys while turning the printer until you see a message Performing Self Test on the printer screen.
Step 8: Check the options you have after you are in the Diagnostics Mode. Choose Maintenance Count>Reset.
Step 9: The ink level count will now be reset and you will stop receiving Low Ink messages on the printer.
Step 10: Now, push the Return button for going out of the Diagnostics Mode. You can go back to the normal mode of the printer to end the process of how to refill Lexmark 44xl ink cartridge.