How To Refill Lexmark 17 Ink Cartridge
To refill the Lexmark 17 ink cartridge, all you need is to purchase an ink refill kit from a nearby retailer. Ink cartridges are very essential and they need to be installed before you set up your printer for home or office use. When you take dozens of color print outputs there are chances that the printer cartridge may run out of ink. Instead of buying a new cartridge, you can refill it, and save money. Follow the instructions given below to how to refill Lexmark 17 ink cartridge.
Quick Steps To Refill The Lexmark 17 Ink Cartridge
- Purchase a new ink cartridge from an online retailer.
- Collect the necessary items like a roll of paper, disposable plastic gloves, refill kit, syringe, and a table.
- Take out the empty or old ink cartridge from the printer.
- Remove the label from the top the ink cartridge using the knife and create fill holes on the empty cartridge.
- Draw ink from the new ink bottle into the syringe slowly, and inject it into the holes of the empty cartridge.
- Stop filling the ink cartridge when you see a bit of ink oozing out of the holes.
- Close the holes with a small piece of clear scotch tape.
- Replace the ink cartridge of the printer, and try a test print.
10 Steps: How To Refill The Lexmark 17 Ink Cartridge
Step 1: Read in detail about how to refill the Lexmark 17 ink cartridge. The Lexmark 17 ink cartridge performs well in comparison to their price. Let us see how to refill Lexmark 17 ink cartridge that goes empty.
Step 2: To fill the Lexmark 17 Black cartridge, go theough the description given here. First, drill a hole on the top of the empty ink cartridge using a screwdriver. Assemble the syringe and steel filling tube. Fill your syringe with level.
Step 3: Insert the syringe in the hole and fill it with 10ml of ink. If ink starts coming out of the hole, stop the action at once, wait for awhile to begin refilling again. After refilling the ink cartridge, lift it for about 30 seconds to check if a drop of ink is dripping from the printhead.
Step 4: Check if ink is dripping from the ink cartridge if yes, then go back and use the syringe to remove the excess ink through the appropriate refill hole. Close the holes with a small piece of clear scotch tape.
Step 5: After refilling the ink cartridge, carefully place it on the folded piece of paper towel. Do not wipe the cartridge. Leave the cartridge on the non-absorbent surface overnight; this will ensure no leakage. Install the ink cartridge back to the printer and perform a test print.
Step 6: To refill the ink cartridge in another way, keep your new ink bottle ready for refilling. Remove the top label from your empty ink cartridge; you can use a knife or your finger to take it. Now you will look for a the relevant refill holes and proceed to next step of how to refill Lexmark 17 ink cartridge.
Step 7: Make a hole on the top of the ink cartridge, fill the holes with the ink using the syringe. If ink comes out of the hole, exit the action for a while, and try to refill the hole after a while. Clean any excess ink from the lid of the cartridge with a paper towel.
Step 8: Reapply the label using a small piece of tape that suits the ink cartridge, never overlap the sides of the label. Now that the refill is complete, reinstalls the ink cartridge into the Lexmark printer.
Step 9: An easy method to refill the ink cartridge is to put the cartridge in the refill clip and then open the holes on the top of the ink cartridge with a sharp object. Fill the syringe with ink, insert the needle of the syringe through the holes in the ink cartridge.
Step 10: Slowly fill the cartridge with ink, after refilling, remove the cartridge from the refill clip, and clean it with a piece of paper. Reinsert the ink cartridge into the printer. If not the refilling process works well, please again follow the above steps for how to refill Lexmark 17 ink cartridge.