how to refill ink cartridges canon

How to Refill Ink Cartridges Canon

Purchasing a new Canon ink cartridge for replacing the existing one would be an expensive approach. Instead, buy compatible refill ink and fill the ink cartridges. The steps below will help you on how to refill ink cartridges canon printer.

Quick Guide for Performing Ink Cartridge Refill

  1. Power on the printer.
  2. Check the ink level in your cartridge.
  3. Open the front cover of the printer.
  4. Press the cartridge to be refilled until you hear a click.
  5. Remove the cartridge from the slot and place it on a paper towel.
  6. Locate the fill hole in the sponge area and fill the sponge area with ink.
  7. Look for a small circle beneath the code denoting the color of the ink cartridge.
  8. Drill the hole and fill ink via the hole.
how to refill ink cartridges canon

Detailed Instructions for Refilling the Canon Ink Cartridges

Power up your Canon printer and wait until it is idle. Check for the lamps against each the cartridge icon and make sure the ink cartridge you want to refill is empty. Pull the output tray and the output tray extension for how to refill ink cartridges canon. Open the front cover of the printer and wait for the cartridge holder to move to the replacement position. Do not touch the FINE cartridge holder until it stops.

Press the empty cartridge down until it clicks to a position. This releases the cartridge. Remove the cartridge and place it on a clean paper towel. The cartridges may have some ink leakage. Get an refill ink cartridges canon kit comprising the ink bottle, syringe, and a thumb drill. Fill ink in the syringe. Now locate the sponge area on the cartridge and find the hole from where the ink comes out. Fill the sponge by dropping some ink on it to refill ink cartridges canon.

Seal the exit hole with tape to prevent the leakage of ink after refilling the Canon cartridges.

Now locate a small beneath the color code on the cartridge. You will see a small circle with a dimple in it. Drill at the middle of the dimple using the thumb drill. Insert the needle into the hole and start filling the ink. Do not overfill the cartridges to refill ink cartridges canon.

Remove the syringe needle from the hole and place it on a paper towel. Seal the hole using glue or hot wax. You can also use an electric tape for sealing. Do not forget to remove the tape on the sponge area.

Reinsert the refilled ink cartridge into the printer and close the front cover. Run a cleaning cycle after installing the cartridge. Allow the sponge to take up all the new ink cartridges. Now align the printhead by performing the steps below to refill ink cartridges canon.

Make sure there is enough paper in the input tray. Print a printhead alignment sheet by pressing the STOP button four times until you see the flashing of the Alarm light. Lift the scanner lid and place the alignment sheet on the glass. Close the lid and then press the Black button. The printer will scan the page and adjust the printhead position automatically. Once the alignment is complete, you will see the ON lamp lit. Remove the sheet from the scanner glass for how to refill ink cartridges canon.

hp printer technical support