how to install lexmark printer cartridge

How To Install Lexmark Printer Cartridge

Ink or toner is needed for performing several functions of the Lexmark printer. A container that holds the toner or ink is called cartridges. They must be installed into the printer. Make sure you are installing cartridges that are genuine and compatible with the model of your Lexmark printer. The instructions on how to install Lexmark printer cartridge are provided on this web page. The cartridges are available at an affordable rate and produce high-quality texts and pictures.

Instructions On How To Install The Cartridges Into The Lexmark Printer

  1. Long press the Lexmark printer’s Power button to switch it On.
  2. Now raise the scanner unit or the cartridge access door.
  3. Check if the cartridge holder slides to the center of the Lexmark printer.
  4. Take the delivered ink cartridges out of the packaging.
  5. Peel the orange tape that is present on the cartridge.
  6. Do not touch the metal or gold contacts that are available on the cartridge.
  7. Insert the cartridges into their correct slots. Press until the cartridges get seated correctly and close the lid, and then close the access door.
  8. Tap the Yes button and choose the Select Option. Do not continue until your Lexmark printer prints an alignment page.
how to install lexmark printer cartridge

Procedures On How To Insert Cartridges In The Lexmark Printer

Step 1: Installing the ink or toner cartridges must be carried out to perform various operations such as printing or copying. Make sure that the cartridges which you are going to install are fine and compatible with the model of the Lexmark printer.

Step 2: The toner or ink cartridges are usually delivered along with your Lexmark printer. Else, you can buy the compatible cartridges from a trusted retailer. The steps on how to install Lexmark printer cartridge are as follows.

Step 3: Press the Power button that is located on your Lexmark printer to turn On the device. Open the scanner unit or cartridge access door and check if the holder moves to the center of the Lexmark printer.

Step 4: Slightly press the cartridge latch to open the lid. Remove the sticker and tape that is present below the ink cartridge. Make sure that you don’t touch the metal nozzles or gold contacts located at the bottom and rear side of the cartridge. Install the new cartridge into the appropriate place and press it down until it locks into place.

Step 5: Keep the black cartridge into the slot on the left and the color cartridge in the right slot. Close the lid and then lower the scanner unit or access cover. If required, place papers into the main input tray. On the operation panel of the Lexmark printer, choose the Yes button and move to the next step of how to install Lexmark printer cartridge.

Step 6: Press the Select option and then wait until your Lexmark printer prints an alignment sheet. If your printer uses toner cartridges, proceed with the steps given here. Raise the front cover and then pull the multipurpose feeder door. Now take the new toner cartridge out of its package and discard the packing material.

Step 7: Now distribute the toner powder by shaking the cartridge. Install the toner cartridge by aligning its side rails with the arrows present on your Lexmark printer. Ensure that the cartridge is pushed in fully. Ascertain to close the front cover and the multipurpose feeder door.

Step 8: Make sure to verify the ink or toner levels on a regular basis. Ensure that your Lexmark printer is powered On and a Ready message displays on the panel.

Step 9: Tap the Key button on the printer’s control panel. Touch the Reports option and select the Tick button, and then the Device Statistics window opens on the screen.

Step 10: Choose the Tick option, and the Lexmark printer will print the Printing Devices Statistics Page. Users can now view the ink or toner levels under the Supply Information column to complete the procedure of how to install Lexmark printer cartridge.

hp printer technical support