How to Install HP Envy Photo 6222 Printer?

How to Install HP Envy Photo 6222 Printer? [Quick Steps]

HP Envy Photo 6222 is an All-in-One printer. It supports the AirPrint and Mopria Print features. Apart from printing on ordinary paper, you can also print on cards and envelopes using this printer. The printer weighs around 7.60 kg or 16.75 lb (U.S. standards). It makes use of the HP Thermal Inkjet printing technology and supports automatic duplex (double-sided) printing. Let’s now look into the steps for how to install HP Envy Photo 6222 printer in detail.

How to Install HP Envy Photo 6222 Printer

Unboxing HP Envy 6222 Printer

  1. First, open the printer box.
  2. Next, remove the printer documentation and cartridges from the box.
  3. Pull the printer carefully out of the box using the handles provided.
  4. Also, remove the Styrofoam end caps from both sides of the printer.
  5. From the memory card reader door, remove the blue tape, if required.
  6. You have to lift the scanner lid and then take out the foam sheet.
  7. You can now lower the scanner lid.
  8. Lift the cartridge access door.
  9. Pull the blue tape so that you can remove the cardboard from the carriage.
  10. Lower the cartridge access door.
  11. You have now completed the initial stage in the installation of the HP Envy Photo 6222 printer.

Powering On HP Envy Photo Printer

  1. Take the power cable and connect one of its ends to the back of the printer.
  2. Next, plug the opposite end of this power cable into an electrical outlet.
  3. On the front of the printer, you will find the Power button. You have to press this button to turn on the printer.

Choosing The Language

  1. On the printer control panel, choose the desired language. Now, touch the Confirm button.
  2. You can now select your country/region and then touch the Confirm button.
  3. The next step in the installation of the HP Envy Photo 6222 printer is to install the ink cartridges.

Installing HP Envy Cartridges

  1. The first step is to open the cartridge access door.
  2. Next, you need to remove the Black cartridge from its package.
  3. Hold the cartridge by its sides. Pull the orange tab so that you can remove the plastic strip.
  4. Start installing the cartridges in their correct slots. Make sure that you install the Tri-color cartridge on the left and the Black one on the right.
  5. You first need to insert the Black cartridge into the carriage. Just push it forward so that it locks into place.
  6. Now, remove the Tri-color cartridge from its package.
  7. Hold the cartridge by its sides. Pull the orange tab so that you can remove the plastic strip.
  8. You need to insert the Tri-color cartridge into its slot in the carriage. Push it forward so that it locks into place.
  9. You can now close the cartridge access door.
  10. Now, touch the OK button on the printer control panel.

Loading Paper Into The Printer

  1. First, you have to slide out the input tray.
  2. Next, remove the output tray.
  3. Remove the blue tapes and slide in the photo tray.
  4. It is now time to slide the paper guides to the outermost position.
  5. Take a stack of plain, letter-sized paper. Fan it well.
  6. Use a flat surface to make the edges of the stack even.
  7. Load the stack of paper and then push it into the paper tray until it stops.
  8. You can now adjust the paper guides such that they touch the paper stack.
  9. Reinstall the output tray.
  10. Slide in the paper tray.
  11. Turn your attention to the printer control panel and touch the OK button. This action is to confirm the loading of paper.
  12. You will now find that an Alignment Page gets printed automatically.
  13. Touch the OK button on the printer control panel.

The hardware part of the setup is now over. Once you install the printer software, the entire setup for how to install HP Envy photo 6222 printer will be complete. When the printer setup is complete, you can add it to your HP Support Dashboard if required.

[/su_column] [/su_row]
shares
hp printer technical support