How to Reset Brother Printer
For simple instructions on how to reset Brother printer, utilize the steps provided below. This page comprises instructions of resetting the printer in three methods. Three methods are Network reset, Address & Fax reset, and All Settings.
STEPS TO RESET THE PRINT SERVER TO DEFAULT FACTORY SETTINGS
- Check if the Brother printer is switched off.
- Confirm that the front cover is closed and the power cord is connected to the printer.
- When you press the Power button, hold down the Go button.
- Continue to press the Go button until all the LEDs light up.
- Check if the Ready LED turns off.
- Release the Go button when the Ready LED turns off.
- Confirm that all the LED’s are turned off.
- Press the Go button for six times and ensure all the LEDs light up. This will indicate that the print server has been reset to its factory default settings and printer will restart.
Related Articles For “Printer Reset Guide”
DIFFERENT METHODS TO RESET THE BROTHER PRINTER
There are three methods on how to reset Brother printer: Network, All Settings, and Address & Fax. If you need to reset the password and IP address, then opt for Network method. The Network method resets the internal print server back to its default factory settings.
The Address & Fax method will reset all the stored phone numbers and fax settings. When you opt for All Settings method, the printer settings can be reset back to the settings that were set in the factory.
Use these steps to reset the print server to the default factory settings. Power off the Brother printer. Confirm that the front cover is closed and make sure that the power cord is connected to the printer. Locate the Go button on the printer’s control panel.
Press and hold it while you press the Power button on the printer. Continuously press the GO button until you will find all the LEDs light up. When you find it, see if the Ready LED turns off.
Release the Go button and ensure that all the LEDs are powered off. Around 6 times, press the Go button. Check if all the LEDs light up. If yes, then it indicates that the print server is reset to its factory default settings and the printer will restart.
You can also try these steps to reset the Brother printer. If choosing Network or All Settings, unplug the interface cable. Press Menu and click the UP or DOWN ARROW key, and then select the Initial Setup. Press Ok. Tap the arrow keys Up/Down to select the Reset option. Then click on the Ok button.
To choose the reset function you want to use, press the UP OR DOWN ARROW key. Press the OK option. Follow these instructions how to reset Brother printer. Press 1 and skip to the next step to reset the settings. Otherwise, press 2 to exit without making changes. You will be instructed to reset the printer. Press 1 to reset the printer and the device will begin to reset. Press 2 if you need to exit without resetting the machine.