How to connect Epson wireless printer

How to connect Epson wireless printer

The Epson printer can be connected to a wireless computer through wireless or wired LAN. The wireless LAN connection, in turn, can be set up with or without a router. The wired LAN connection setup requires a router or hub connected to the printer via a wired cable and here you know how to connect epson wireless printer.

Quick Guide for setting up the Epson printer on a wireless network

  1. Perform the hardware setup for your Epson printer.
  2. Tap the WPS button on the printer and then immediately locate the WPS button on your router and press it.
  3. Insert the DVD-ROM supplied along with the printer into the computer.
  4. Download Epson Connect Printer Setup Utility from the manufacturer’s website.
  5. Click the Install application and driver option and agree to the license agreement.
  6. Select the printer’s name and then choose wireless/wired LAN.
  7. Click the Configure LAN settings option and choose the Obtain the IP address automatically option.
  8. Select Wireless LAN and complete the configuration by following the prompts displayed on the screen.
how to connect epson wireless printer

Detailed instructions for setting up Epson printer on a wireless network

To start with how to connect epson wireless printer, the wireless LAN settings can be performed by the automatic push-button configuration or PIN method. The former type requires a router with a WPS button, and the latter type requires router must be compatible with a WPS PIN code input method.

The initial step in the push button configuration method is configuring the LAN settings. Insert the DVD-ROM supplied along with the printer into your computer. Click the Install Application and Driver tab on the Installer screen. Accept the terms of the installer and then select the printer mode in the next screen will help you on connect epson wireless printer.

Choose the Wired/Wireless LAN connection, and then select the Configure LAN settings option. Prefer the Obtain IP address automatically option to make the process easier. Now power up the printer and make sure there is no USB/network cable connected to it. Keep clicking the Wi-Fi tab on the installer screen until you reach the Infrastructure Mode.

Now press the Wi-Fi button on the printer’s control panel to switch to the Infrastructure Mode. The lamp next to the Wi-Fi button should flash now. Press the WPS button on the router when prompted. The Wi-Fi lamp will begin flashing again. Once the settings are configured, the Wi-Fi lamp will light up solid. Complete the configuration on the installer screen to connect epson wireless printer.

To perform the PIN code method, insert a tape cartridge into the printer and then turn the printer on. Make sure the printer is set on the Infrastructure mode. Now hold the WPS button on the printer for at least 3 seconds. The printer will print a code when the Wi-Fi lamp flashes.

Go to your router and register the PIN code on it before the Wi-Fi lamp on the printer stops flashing. Once the printer connects to the network, the Wi-Fi lamp will light up solid to connect epson wireless printer.

Now configure the settings using the DVD-ROM. Insert the disc into your computer’s hard drive, and follow the prompts as in the above method. When the LAN settings screen appears, make sure to select the Do not configure LAN settings option. Keep following the prompts until the setup for how to connect epson wireless printer is complete.

shares
HP Printer Guidelines