How to connect Epson printer to WiFi
The Epson printer can be set up on the Wi-Fi Direct mode to have direct communication with your devices without the need for a wireless router. You can also quickly connect the printer to the network using Wi-Fi Protected Setup (WPS) which needs a WPS-enabled wireless router which provides how to connect epson printer to wifi.
Connecting the Epson printer to WiFi
- Power up the printer and wait till it does not make noise.
- Press the Wi-Fi icon on the printer’s control panel.
- Select Wi-Fi Direct on the Network Connection screen.
- Enable Wi-Fi on your device and provide the password. Carry out the steps below to perform Wi-Fi Protected Setup.
- Open the Network Connection Settings screen and select the Router option.
- Tap the Push Button Setup (WPS).
- Do according to the prompts displayed on the screen to complete the setup.
- Call us at the toll-free number for further assistance.
Descriptive instructions for connecting the Epson printer to WiFi
Switch on the printer and wait until it is silent. Make sure you have installed the printer’s software on your computer. As the initial step in carrying out the Wifi Direct Mode setup, press the Wi-Fi button on the printer’s control panel which helps on how to connect epson printer to wifi.
Tap the Wi-Fi Direct on the Network Connection screen. Select the Start Setup option. The Wi-Fi Direct screen will now be opened. Note the Network (SSID) and password displayed on the printer’s control panel.
Now enable Wi-Fi on your device and provide the password when prompted. Now press the Home button on the printer’s control panel. The printer should connect to the Wi-Fi network. Repeat the steps if the printer does not connect to the network.
To connect the printer to Wi-Fi by the WPS setup, press the Wi-Fi icon on the control panel. Once the Network Settings screen opens, select the Router option and tap the Change Settings option. Now select the Push Button Setup and carry out the instructions displayed on the LCD screen.
Locate and Press the WPS button on your wireless router within 2 minutes. The printer will begin searching for the network and connects to it. Finally, press the Home button on the control panel.
Make sure the connected icon is displayed on the control panel. Print a test page in order to verify the connection between the printer and the network.
To perform the Wi-Fi Infrastructure Mode setup, press the Home button and tap the Wi-Fi icon. Select the Router option followed by Start Setup or Change Settings. Open Wi-Fi Setup Wizard and select your wireless network name. If the wireless network name is not displayed, enter it manually.
Select Enter Password and type the wireless password using the display keyboard. Tap OK on the keyboard once you finish entering the password. Select Start Setup and tap the Print Check Report option if you want to print a network setup report. Press OK followed by Home button, which helps to successfully perform the function on how to connect epson printer to wifi.