how to connect Epson printer to a laptop

How to Connect Epson Printer to a Laptop

There are different methods to connect the Epson printer to a laptop. Two of them include USB cable and wireless network. Check if the cable is connected properly. Go through the instructions mentioned on the screen to start the connection process and how to connect Epson printer to a laptop.

Simple Steps to Connect Epson Printer to the Laptop

  1. Find the USB cable in the printer’s shipment box.
  2. Take the it out of the box.
  3. Plug in the cable to the printer’s rear and the USB port of the system.
  4. View the printer name in the list of available devices.
  5. If the printer name is not displayed, install the printer driver on the system.
  6. Use the on-screen instructions to start the installation.
  7. To establish a connection, go through the steps below.
how to connect Epson printer to a laptop

Brief Solutions to Connect Epson Printer to the Laptop

Configure the printer to communicate with the system using a wireless router. Connect the router to a system over a wireless network. Change the wireless settings from the printer’s control panel, which will work on how to connect Epson printer to a laptop.

Press the Home button on the printer’s control panel. Use the up & down arrow buttons, choose Wi-Fi Setup, and press OK. Choose the Wi-Fi Setup Wizard option and press OK. Choose the wireless network’s name and password.

If the network name is unavailable, select other SSIDs and press OK -> Type the network name. Key in the wireless password if required. Refrain from proceeding until the printer starts establishing the connection.

Try to print a network setup report. Press the Start button. Click the Home button to get out of the home screen. Press the Wi-Fi symbol on the LCD screen. If you are using the Wi-Fi Direct mode, select any one of the modes for connection.

Press the Home button on the printer’s control panel. Press the Up and Down arrows to choose the Wi-Fi Setup and select OK. Make use of the Up arrow to choose Wi-Fi Direct Setup and press OK. Click the Connection Setup icon and press OK.

Type the Wi-Fi Direct password and press OK after entering the password. Make use of the system’s wireless device to choose the Wi-Fi network’s name on the LCD screen. The other method is to perform a Wi-Fi Protected Setup. There are two methods available PUSH and PIN.

Find the WPS button on the router. Press the PUSH button to establish the network connection. Press the WPS button on the router. Click the Home button on the printer’s control panel. Choose Wi-Fi Setup from the list of available devices. Press OK.

You can print Network Status Report from the printer. You can change the USB connection to Wi-Fi if required. To change the connection, detach the cable from the printer’s rear. Uninstall the existing driver and reinstall it with a new one for how to connect Epson printer to a laptop.

shares
hp printer technical support