how to connect canon mg2900 printer to wifi

How To Connect Canon MG2900 Printer To Wifi

For how to connect Canon mg2900 printer to wifi will let you perform wireless printing. Perform the wireless setup process by referring to the steps that are given in the user manual. Else, you can refer to the prompts that are given below perform the same.

Simple Steps To Connect The Canon MG2900 Printer To WiFi

  1. Change the connection mode by pressing and holding the Wi-Fi button on the printer.
  2. Press and hold the Wi-Fi button on the printer until the Alarm lamp blinks.
  3. The connection mode will change depending on the number of flashes.
  4. You need to release the Wi-Fi button after the light burns the third time.
  5. Look for the SSID and network key & note it down.
  6. To connect using WPS, hold the Wi-Fi and Alarm button on the printer until the Wi-Fi button finishes.
  7. The Wi-Fi and ON lamp will flash within two minutes.
  8. This confirms that the Wi-Fi setup is complete.
how to connect canon mg2900 printer to wifi

Detailed Process Of Connecting The Canon MG2900 Printer To WiFi

Connecting the Canon mg2900 to your Wi-Fi network lets your print scan and copy documents wirelessly using the guide of how to connect canon mg2900 printer to wifi. Check whether the printer is set up for first use. The ink cartridges need to be installed properly, and the paper should be loaded in the input tray. Download the latest version of the printer driver on your computer. Install it by following the prompts that appear on the screen.

There are two methods involved in establishing a Wi-Fi connection. One is via standard WPS, and the other is standard. Perform the WPS process by long pressing the Wi-Fi button on the printer. Now, wait for the Alarm lamp to flash. The printer needs to be kept close to the router. Push the WPS button within two minutes, and the blue Wi-Fi lamp starts flashing. Confirm the network settings by doing the following.

Turn on the Canon mg 2900 printer, load a sheet of A4 or letter-sized plain paper, and press and hold the Resume and Cancel buttons simultaneously. Release that button once the Alarm lamps flashes 15 times. Now the network information page will get printed. This concludes the WPS setup process. If the driver installation disc is outdated or unavailable, visit the manufacturer’s site to obtain the same and follow the manual of how to connect canon mg2900 printer to wifi.

You can connect the printer and computer even if you don’t have a router with an active internet connection. Do this using Canon Wireless Direct. To use this feature, you need to place your printer and computer close to each other. Change the printer’s LAN settings, press and hold the Wi-Fi button of the device and release it once the Wi-Fi lamp flashes. Press the Black button until the ON lamp flashes and Wi-Fi lamp lights on. Push the Color or Black button to complete the selection.

You need to change the printer settings to use wireless LAN. Ascertain that the printer is turned on and hold the Wi-Fi button and release it once the lamp flashes. This ensures that the printer settings have changed properly with the user manual of how to connect canon mg2900 printer to wifi.

shares
HP Printer Guidelines