how to clean lexmark printer rollers

How To Clean Lexmark Printer Rollers

For how to clean Lexmark printer rollers by locating them in your device. Printer rollers are small rubber pieces that are circular in size. It helps you feed paper in your printer. Once you start to clean the Lexmark Printer Rollers, use a pair of protective gloves to prevent your printer from damages that may occur. You can also protect your hands from ink spillage. You can cleanse them with water and a cloth.

STEPS TO CLEAN LEXMARK PRINTER ROLLERS

  1. Switch off the printer and unplug it from the power supply.
  2. Open the main door of the printer by releasing the latch that is found on the left side of the printer.
  3. Remove the ink cartridge from the printer. You need to hold the cartridge using the handles only.
  4. Detect the rollers & look for its mounting arms.
  5. Press one of the mounting arms outwards to remove them from the printer.
  6. Wash the roller with warm water and wipe it with a soft cloth to clear any dust particles on it.
  7. Dry the printer roller.
  8. Replace the roller in the printer.
how to clean lexmark printer rollers

DETAILED STEPS TO CLEAN LEXMARK PRINTER ROLLER

Step 1: Cleaning the printer roller will help you to fix most of the paper-feeding problems. Firstly, you need to turn the machine off and unplug the power connection. Make sure that there is no electric supply inside the device. Never try to clean the printer if the power is on as it may cause damage to your device and avoid electrocution. If you have used the machine recently, then wait until it cools down. Handling the inner components of the printer needs care. Hence you need to pay more attention during the process of how to clean Lexmark printer rollers.

Step 2: Remove the paper from the tray. Open the main door of the printer using the release hatch which is found at the left side of the machine. The rollers and other internal materials of the device are exposed.

Step 3: Now you need to take the cartridge out of the printer. Hold the handle of the cartridge with both the hands & pull it out at a 45-degree angle until it comes out of the machine.

Step 4: Place the main door in a halfway position to locate the roller easily as the roller moves along with the door. After you find the roller, detect its mounting arms.

Step 5: Now you have to detach the roller by pushing one of the mounting arms outwards. Usually, the mounting arms are found on both sides of the roller. However, it is enough to push any one of the arms to remove them from the roller. After it gets loosened, pull the roller out of the printer and follow the next step of how to clean Lexmark printer rollers.

Step 6: You can now wash them with warm water. Hold the roller under warm running water to cleanse it. Make sure you have fully rotated the roller to clean each part of the surface. Wipe the roller’s surface with a soft cloth to cleanse any ink or dust particles that are attached. You can use an activated toner cloth that has a non-oily coating which traps the dirt particles for easy removal. You can dispose the tissue after use. Dry the roller.

Step 7: Now you have to reassemble the parts into the device. Reattach the mounting arms of the roller to place it correctly. Open the door and replace the cartridge inside. Once you have placed it, you are done with the process of how to clean Lexmark printer rollers. Reconnect the power cord and then switch on your printer.

shares
hp printer technical support