how to change toner in brother printer

How to Change Toner in Brother Printer

The toner cartridge must be changed when the toner levels inside it are less or empty. You can monitor the ink levels on your printer’s operation panel by using the Brother Utility software. Replace the toner cartridges as soon as possible if the ink levels are less or empty and take the help with the guide of how to change toner in brother printer.

Instructions on How to Change the Toner Cartridge in Brother Printer

  1. Make sure to switch On your Brother printer.
  2. Open the front cover that is located on your Brother printer.
  3. Discard the drum unit and toner cartridge of the device.
  4. Push the green lock lever and take the old toner cartridge out.
  5. Purchase cartridges that are compatible with your Brother printer.
  6. Discard the protective cover present on the new toner cartridge.
  7. Put the new cartridge into the slot and push until it gets locked into place.
  8. Reinstall the drum unit and lower the front cover.
how to change toner in brother printer

Procedures on How to Replace Toner Cartridge in Brother Printer

Before you going to start the process of how to change toner in brother printer, first you need to check the status of your toner cartridge on the operation panel of your Brother printer. Tap the Ink Management or Ink icon on your Brother printer’s panel. Touch the Up or Down arrow button, select the Ink Volume option, and then press OK.

Tap the Stop or Exit option and the toner levels get displayed on your printer’s screen. The tips to be followed when the toner cartridge is changed are discussed here. Do not turn Off your Brother printer or raise the front cover until the device is in an Active or a Ready state to change toner in brother printer.

The toner cartridge that is delivered along with your Brother printer is a Starter toner cartridge. To obtain high-quality printing, it is always suggested to use Genuine toner cartridges that are compatible with the model of your Brother printer. Ascertain not to open the new toner cartridge until you are ready to insert it.

It is highly recommended not to refill the toner cartridges. The life of your toner cartridge will be reduced if it is left open for a longer period of time. If the toner levels are low or empty, get the replacement toner cartridges from the Brother Supplies Store or an authorized seller. Long press the Power button on your Brother printer to switch On your device to change toner in brother printer.

Locate the front cover on your Brother printer and then lift it. Take the drum unit assembly and the toner cartridge out of the Brother printer. Locate the green lock lever on your device and push it. Remove the empty toner out of the drum unit. Ensure that you have got toner cartridges that are compatible with the model of your Brother printer.

Unpack the new toner cartridge from its packing and then discard the cover present on top. Place the new toner cartridge inside the drum unit and push until you hear a click sound to change toner in brother printer.

Ensure that you have inserted the toner cartridge properly, else it may get separated from the drum unit. Wipe the corona wire that is present inside the drum unit. Now install the toner cartridge & drum assembly back to your Brother printer and then close the front cover and complete the process of how to change toner in brother printer.

shares
hp printer technical support