- Fix My Printer >>
- All Queries >>
- change ink cartridge on HP LaserJet Pro 400 m401d
How to Change Ink cCartridge on HP Laserjet Pro 400 m401d
The HP LaserJet Pro 400 m401d printer can efficiently print and scan at a high resolution. It supports composite back ink cartridges that can print a large number of print jobs. Use only genuine cartridges to avoid print quality issues and other technical faults. And know how to change ink cartridge on HP LaserJet Pro 400 m401d.
Replacing ink cartridge on HP LaserJet Pro 400 m401d
- Power up the LaserJet printer and open its front cover.
- Pull the cartridge out and place it on a clean paper towel.
- Unwrap the new toner cartridge and remove the orange tab on it.
- Rock the new toner cartridge back and forth to spread the toner evenly.
- Insert the cartridge into the printer.
- Close the front door.
- Wait for the printer to print a test page.
- Dial the contact number for any assistance in replacing the ink cartridge.
Related Articles For “How to Change Ink”
A Detailed Procedure for Replacing the Empty/Defective Cartridge
Power up the HP LaserJet Pro 400 m401d printer and wait until it is idle and silent. Press the Front Cover button on the printer’s side to open the cover. You can view the cartridges. Hold the handles of the toner cartridge and pull the cartridge out. Place it on a clean paper towel, while performing.
Use only genuine toner cartridges. Loading third-party cartridges may result in print quality issues. Unwrap the new toner cartridges. Remove the orange tab from the cartridge and hold the toner cartridge by its sides. Rock the cartridge back and forth to spread the toner inside the cartridge evenly for change ink cartridge on HP LaserJet Pro 400 m401d.
Do not touch the imaging drum or memory chip. Touching them may cause Print quality issues. Insert the toner cartridge into the machine and close the front cover. Make sure the toner cartridge is seated correctly. The printer will undergo the initialization process and then print test page to change ink cartridge
Draw the paper input tray out and slide out the paper width guides. Place enough paper in it. Push the stack inside the tray until it can move no further. Use only compatible paper to avoid any jams during printing for change ink cartridge on HP LaserJet Pro 400 m401d.
Adjust the guides in a way such that they rest against the edges of the stack. Make sure the stack of paper is held firmly. Ascertain that you have connected the printer and computer properly. Open the document that you need to print and click the File menu.
Select Print and click the Print Properties option to make changes to the print settings and click Print. Collect the printed document from the printer’s output tray and examine it.
If the quality is not satisfactory, run a printhead cleaning cycle from the printer’s control panel or the printer software. Call us at the contact number for further assistance on how to change ink cartridge on HP LaserJet Pro 400 m401d.
