How to change ink cartridge Epson WF 2630
If the ink level is low, it is necessary on how to change ink cartridge Epson wf 2630 printer. Insert the ink cartridges immediately. Take the old cartridges before installing a new one. Read through the steps below to change ink cartridges.
Uninstalling and reinstalling the ink cartridge Epson wf 2630 printer
- Use the Power button to turn off your printer.
- Make sure that you connect the printer and the system using a USB cable.
- Remove the old ink cartridge from its slot.
- Check if the ink cartridge is open until it installs properly.
- Purchase the ink cartridge from a trusted ink provider.
- Ensure that you do not shake ink cartridges after opening the package.
- Install the cartridge into its slot until it snaps into place.
Elaborate steps to install the ink cartridge for Epson wf 2630 printer
Find the Power button on the printer’s control panel. Press on top of the printer to turn it on. Wait for the carriage to move to the replacement position. Press on top of the cartridge to remove it from the slot for how to change ink cartridge Epson wf 2630 work.
If you are replacing the ink cartridge, use the up and down arrows to choose the Setup icon and press OK. Click Maintenance-> Ink cartridge replacement. Raise the scanner unit. Keep note that the printhead is not used by hand as it may damage the printer for change ink cartridge Epson wf 2630.
Make sure that you do not touch the white cable of the printer. Squeeze the cartridge tab and raise it to remove it out of the slot. Rock it for four to five times prior to taking the new ink cartridge packaging.
Take the new ink cartridge out of its packaging. Check if there is a green chip on the cartridge. Do not touch it as it may lead to the cartridge issues. Insert the new ink cartridge immediately. After removing the old cartridge out of the slot for change ink cartridge Epson wf 2630.
Tear the yellow tape on the side of the cartridge. If there are labels or seals on the cartridge, do not remove them as it may lead to the ink leak. Install the new ink cartridge into its holder and press on top of it until it snaps into place.
Pull the scanner unit. Press any of the Start buttons. Wait for the printhead slides to its home position. The printer initiates charging the ink. When you view a confirmation message on the screen, ink charging is finished for change ink cartridge Epson wf 2630.
Use the up and down arrows to choose Setup and press OK. Click the Ink levels icon and press OK. View the ink status on the LCD screen of the printer. Open the windows to verify the cartridge status. Double-click the printer name to view the ink level.
Right-click the printer name in the Windows taskbar and choose the Monitoring Preferences icon to remove the See Low ink Reminder Alert option at the bottom of the screen. Deselect the Display Epson Offers option to deactivate the promotional offers on how to change ink cartridge Epson wf 2630.