HP 2840 prints blank pages or yellow only

HP 2840 prints blank pages or yellow only

When you print from the printer, it prints a blank page instead of a printed page. The common issues encountered by the printer are provided in detail on the user manual. You can also call us at the toll-free number for any assistance in HP 2840 prints blank pages or yellow only troubleshooting.

HP 2840 prints blank or yellow pages and its solution

  1. Use authentic and compatible printer models.
  2. Insert plain sheets into the input tray.
  3. Tap the Setup icon in the lower left corner on the printer’s control panel.
  4. Choose the Tools option. click OK.
  5. Click the Estimated Ink levels option. Select OK.
  6. Uninstall and reinstall the ink cartridges into their slots.
  7. Align the ink cartridges as it may result in high-quality printouts.
  8. Use an automated tool of the manufacturer to clean the printhead.
HP 2840 prints blank pages or yellow only

How to resolve HP Laserjet 2840 printer blank and yellow ink

Replace the empty ink cartridges: Switch on the printer and load the printer with plain, white paper. Grasp the handle and lift the ink cartridge door up until it locks into space. Lift the ink cartridge and gently push the lid back to release the ink cartridge to fix HP 2840 prints blank pages or yellow only.

To remove the ink cartridge from the slot, pull up on it. Take one of the new ink cartridges and remove the plastic tape from the ink cartridges by holding it carefully.

Slide the ink cartridge forward into the slot and close the lid of the ink cartridge. Close the ink cartridge access door.

Clear the area around the ink nozzles manually: Power on the printer and remove the ink cartridge from its slot. Hold the ink cartridges by its sides.

Moisten a foam- rubber swab or lint- free cloth with distilled water and squeeze excess of water from it. Clean the edges and face around the ink cartridge with the swab. Either allow the ink cartridge to sit for 10 minutes or a new swab to dry it.

Print a Print Quality Diagnostic Report: On the Printer Control Panel, swipe it to the left and select the Setup icon. Touch tools and swipe up the display and touch Print Quality Report. A Print Quality Diagnostic Report prints.

Examine the color blocks for defects. If any of the color blocks does not show white lines, they are not faded.

If any of the color blocks shows white lines, they are faded.

Go through the alignment lines and green color block on the Print Quality Diagnostic Report.

Check if the lines are straight and connected and there are no dark lines or white gaps in the green color blocks, by using this guide you can solve HP 2840 prints blank pages or yellow only problem.

hp printer technical support