Canon Pixma IP4200 Printer Troubleshooting

Canon Pixma IP4200 Printer Troubleshooting

Canon Pixma IP4200 printer Troubleshooting

The Canon Pixma IP 4200 printer is a compact printer that is capable of producing a resolution of 9600*2400 color dpi resolution. Occasionally, users face issues such as printer driver installation errors, printer malfunction, paper jams, and so on. These are issues which can be easily solved. The solutions for known Canon Pixma IP4200 Printer Troubleshooting issues are covered in the topics given below.

How To Troubleshoot Issues on a Canon Pixma IP 4200

Follow these guidelines to troubleshoot issues on a Canon Pixma IP 4200 printer.

  • Power off the Canon Pixma IP 4200 printer and turn it on again.
  • Unplug the Canon Pixma IP 4200 from its power source while it is still on and reattach the power cord after ten seconds. This method resets the Canon Pixma device.
  • Turn the printer manually if it fails to power on by itself.
  • Check whether the printer’s ink cartridges have sufficient ink.
  • Replace the ink cartridges on the Canon Pixma device if they have run out of ink.
  • Unplug the Canon Pixma USB cable from its USB port and the computer. Restart the PC and establish the USB connections again.
  • Check whether there is any paper sheet stuck inside the printer’s input tray. Gently remove the paper sheet and go to the next step.
  • Open the Canon Pixma IP 4200’s top cover.
  • Slide the print cartridge carriage to the left and right sides.
  • Remove the paper from under the print cartridge carriage and close the cover.

How to Troubleshoot common issues on Canon Pixma IP 4200

The detailed guidelines mentioned below will help you troubleshoot and fix issues on your Canon Pixma IP 4200 printer.

  • If you have issues installing the printer driver on your computer, follow these steps. It is possible that the installation was not carried out correctly.
  • To solve this Canon Pixma IP4200 Printer Troubleshooting issue, stop the installation and follow the instructions on the Easy Setup document provided in the Canon Pixma IP 4200 box.
  • If the HP Pixma IP 4200 driver installer was interrupted during installation, the installation might not be carried out correctly. Restart your personal computer and perform the installation again.
  • If the print quality of the Canon Pixma IP 4200 is not satisfactory and there are white streaks on the print, there might be an issue with print quality settings.
  • To solve this issue, go to the Printer Properties dialog box. Check the main tab and look for the Print Quality setting. Choose the High setting in the Print Quality setting. On Mac computers, go to the Print dialog box and choose Quality & Media. Click on the Detailed Settings option and move the Print Quality slider to the Fine end.
  • If you have issues installing the printer driver on your computer, follow these steps. It is likely that the installation was not carried out correctly. To solve this issue, stop the installation and follow the instructions on the Easy Setup document provided in the Canon Pixma IP 4200 box. If the HP Pixma IP 4200 driver installer was interrupted during installation, the installation might not be completed correctly. Restart your personal computer and perform the installation again.
  • If the Canon Pixma IP 4200 printer fails to start or the device stops while printing, there is a high chance that the ink tank is empty.
  • Check whether the ink tank lamp is flashing fast. If so, replace the ink tank on the Pixma device. If the Pixma device is stuck on this error while printing a document, press the Resume/Cancel button to allow the printer to finish the document without ink. Replace the ink tank after the print operation is complete.
  • If there is any paper sheet jammed inside the Canon Pixma IP4200 Printer troubleshooting, perform these steps. Look at the ADF to see whether there is a paper jam there. If there is a jam, gently remove it from the ADF. Remove the jammed paper from the output tray of the Pixma device.
  • Open the Pixma IP 4200’s top cover and remove the paper from the internal components if needed. Take care not to damage the components while removing the jammed paper. Check the rear compartment of the Canon Pixma device by opening the rear cover. Grab the paper and pull it gently to remove it. Close the lids, place paper sheets in the ADF, and press Resume/Cancel. Now, perform the print operation.

Fix your Printer Issues

hp printer repair
shares
hp printer technical support