CANON D570 WIRELESS SETUP ON MAC

Simple Steps For Canon D570 Wireless Setup On Mac

The Canon imageCLASS D570 printer is designed with modern features ideal for work and office purposes. It prints the documents at a speed of up to 28 pages per minute and supports UFR II LT and PCL 5e/6 languages for printing versatility. The built-in Wi-Fi Direct Connection compatibility enables an easy connection to mobile devices without a router. Here’s simple steps for Canon D570 Wireless Setup On Mac.

Canon D570 Wireless Setup On Mac

Canon D570 Wireless Setup Procedure

Unboxing:

  1. Open the printer packaging box. Inside the box, you’ll find the following.
  2. Canon imageCLASS D570 printer
  3. Power cord
  4. Cartridge
  5. Guide
  6. DVD-ROM
  7. Gently remove the packaging components present inside the box along with the printer.
  8. Remove all the protective materials from your printer.
  9. Open the toner cover.
  10. Remove the protective material from the toner cartridge.
  11. Install the toner cartridge.
  12. Close the toner cover.

Loading Paper In The Manual Slot

  1. Open the manual feed cover.
  2. Slide the paper guides towards the outermost position.
  3. Load the paper.
  4. Align the paper guides.
  5. Pull out the paper stopper.

Connecting Canon D570 To A Wireless LAN

Ensure that your computer is properly connected to a network for Canon D570 wireless setup On Mac.

Wireless connection using WPS Push Button mode:

  1. On your printer’s operation panel, press the Menu key.
  2. Select Network Settings and then press OK.
  3. Select Wireless LAN settings.
  4. The Enable the Wireless LAN message appears on the screen. Select Yes and then press OK.
  5. Select the WPS Push Button mode and then press OK.
  6. Select Yes and then press OK.
  7. Press and hold the WPS button on your wireless router until the Wi-Fi indicator blinks on the operation panel.
  8. When the setup is completed, you’ll be able to see the Connected message appearing on the screen.
  9. The Wi-Fi indicator lights up.

Wireless Connection Using WPS Pin Code Mode

  1. Ensure that you can access your wireless router from your computer.
  2. On your printer’s operation panel, press the Menu key.
  3. Select Network Settings and then press OK.
  4. Select Wireless LAN settings and then press OK.
  5. The Enable the Wireless LAN message appears on the screen. Select Yes and then press OK.
  6. Select the WPS PIN Code mode and then press OK.
  7. Select Yes and then press OK.
  8. Now a PIN code will be generated for Canon D570 wireless setup On Mac.
  9. On your computer, access your router’s web config page and register the generated PIN code.
  10. On your printer’s operation panel, check that the Wi-Fi indicator is blinking or not.
  11. When the setup is completed, you’ll be able to see the Connected message appearing on the screen.
  12. The Wi-Fi indicator lights up.

Wireless Connection By Selecting Wireless Router

  1. On your printer’s operation panel, press the Menu key.
  2. Select Wireless LAN Settings and then press OK.
  3. The Enable the Wireless LAN message appears on the screen. Select Yes and then press OK.
  4. Select SSID Settings and then press OK.
  5. Select Select Access Point and then press OK.
  6. Select your wireless LAN router and then press OK.
  7. Enter the Network Key and then select Apply.
  8. Press OK.
  9. Select Yes and then press OK.
  10. Ensure that the Wi-Fi indicator blinks.
  11. When the setup is completed, you’ll be able to see the Connected message appearing on the screen, later the Wi-Fi indicator lights up.

Now go to your Mac and install the Canon imageCLASS D570 printer driver. While installing the driver, choose the wireless connection option. Carry out the instructions on the setup wizard and complete the Canon D570 wireless setup on Mac.

hp printer technical support