brother mfc 9320cw printer troubleshooting

Brother MFC 9320CW Printer Troubleshooting

A process of analyzing and rectifying the issues which the Brother MFC 9320cw printer encounters is called Brother mfc 9320cw printer troubleshooting. It is a systematic way of fixing printer problems. The first step includes identifying what type of error it is and the instructions performed to clear the same. Standard solutions for some of the errors such as paper jam and blank pages are provided on this web page. Resetting the Brother MFC 9320CW printer is the common procedure for resolving the errors.

Simple Steps For Fixing The Errors In Brother MFC 9320CW Printer

  1. Try resetting your Brother MFC 9320CW printer.
  2. Go the rear of your Brother MFC 9320CW printer and remove the electrical cord from it.
  3. Unplug the other end of the electrical cord from the wall outlet as well.
  4. Do not continue for at least one to three minutes.
  5. Reconnect the electrical cord to your Brother MFC 9320CW printer.
  6. Reattach the cord to a functioning power socket.
  7. Make sure you do not utilize a strip or film for setting up the power connection.
  8. Turn On your Brother MFC 9320CW printer by pressing the power button.
  9. Don’t continue until the start-up period completes.
  10. Carry out an operation such as copying or printing.
brother mfc 9320cw printer troubleshooting

Brief Instructions For Troubleshooting Errors In Brother MFC 9320CW

Brother MFC 9320CW printer is not printing: If the display on your printer is blank, it indicates that the device is in the Sleep state. Tap any button on the Brother MFC 9320CW printer to bring it back to the Active state. If the printer does not turn on, make sure that the power cord is properly inserted into a wall outlet. Ensure that all the switches are turned On and follow the Brother mfc 9320cw printer troubleshooting procedure is available from us.

Look for error messages on the LCD screen of your Brother MFC 9320CW printer. Confirm that the connectivity between your Personal Computer and the Brother printer. Power Off your Brother MFC 9320CW printer, wait for a few minutes and then switch back On. Ascertain that the electrical cord and the network cable of your Brother printer are attached properly.

If the cord is plugged to a power switch or surge protector, detach it from the device and plug it directly into an electrical socket. Make sure that you link your system and Brother MFC 9320CW printer to a peer to peer network. Restart your Mac or Windows system and print a sample sheet.

Toner Low error message: This error shows that the cartridges have less toner level inside it. Replace the toner cartridge that is genuine and compatible with the Brother MFC 9320CW printer.

Paper jam: Power Off the Brother printer and detach the telephone cable if connected. Remove all the cables and then disconnect the electrical cord from the AC outlet. Allow the printer to cool for at least ten minutes.

Open the top cover by raising the handle and then removing the toner cartridge assembly and drum units. Pull the jammed sheets out slowly. Place each toner cartridge and drum unit into the Brother MFC 9320CW printer.

Ensure that the colors on the toner cartridge and the label match each other. Lower the top cover and connect the power cable into the socket, and then replug all the other cables. Switch On the Brother MFC 9320CW printer and then check if the paper jam issue is resolved with Brother mfc 9320cw printer troubleshooting guide.

Scan quality issue: For a Windows computer, right-click on the Wordpad icon using the PaperPort software and then select the Send to Options button. Choose the drop-down box present at the right of the window and click any one of the file types that match your scan task. It is always suggested to use .rtf as the type of scan file. Click on the OK button and then carry out a scan and verify whether the quality is acceptable.

If you are using a Mac Personal Computer, open the ControlCenter2 app. Choose Macintosh HD then click on the Library option, and then select the Printers button. Select Brother and choose Utilities, and then click ControlCenter. Now, start the ControlCenter app by selecting the Open button.

The ControlCenter2 dialog box will appear on your Mac screen. Choose Configuration, then select Scan, and then click File. The Settings tab will open and select the tab that you wish to configure. Click Black & White or True Gray in the Scan drop-down box and then choose the OK button. Contact our tech team for more solution regarding Brother mfc 9320cw printer troubleshooting.

shares
hp printer technical support